As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
Resin printing with an elegoo mars 2 pro yields crisp desktop miniatures and accurate prototypes, yet the manual aftermath often creates an untidy workspace full of hazardous solvent splashes and sticky surfaces. Handling raw prints, dunking parts in separate chemical containers, and setting up makeshift curing lamps consumes valuable studio hours and increases direct skin exposure to uncured resin. The ELEGOO Mercury Plus 2.0 targets this friction directly by combining isopropyl alcohol agitation and dedicated UV hardening into a single, compact footprint engineered for desktop makers.
This elegoo mercury plus 2.0 review finds that integrating an automated station transforms messy resin workflows into an orderly, repeatable routine. If you want to streamline your elegoo mars 2 pro post processing without juggling multiple tubs of solvent or dealing with inconsistent sunlight exposure, this dual-mode unit provides the precise cleaning and uniform illumination required to produce finished, display-ready prints efficiently.
01 Quick Verdict
For creators running an elegoo mars 2 pro wash and cure routine, the unit delivers an immediate productivity boost by automating chemical agitation and final hardening in one workspace. It stands out as one of the best wash and cure for mars 2 pro setups due to its bracketed build plate mount and quiet, fan-less curing chamber.
- Dedicated dual-purpose base handles both liquid washing cycles and rotating turntable curing without requiring separate desktop appliances.
- Sealed wash and cure station design incorporates an airtight lid to stop isopropyl alcohol fumes from evaporating into your workshop.
- Integrated 16-diode 405nm light array pairs with a rotating platform to ensure balanced surface polymer crosslinking.
- Direct build plate attachment allows hands-free rinsing directly after printing to minimize uncured resin contact.
02 ELEGOO Mercury Plus 2.0 Features Explained
01 Dual Washing Modes and Adjustable Platform Bracket
Handling uncured photopolymer resin demands strict safety procedures, and the mercury plus 2.0 resin cleaning station addresses handling hazards through two distinct washing methods. Users can detach their printed models from the build platform and place them directly inside the included wire mesh basket for loose batch washing. Alternatively, the station includes an adjustable platform bracket that allows operators to suspend the entire build plate directly from an elegoo mars 2 pro into the solvent container. This bracket can be adjusted vertically to accommodate different liquid levels within the container, preventing solvent overflow while ensuring models remain submerged.
Washing parts while still mounted to the metal build plate eliminates the risk of dropping delicate, uncured prints during scraper removal. By immersing both the plate and the print simultaneously, the swirling liquid loosens trapped resin around intricate contact points before supports are clipped. While newer printers like the mars 4 ultra showcase evolved platform brackets, the bracket system on this machine provides backward and cross-brand compatibility with machines like the ELEGOO Mars, Mars Pro, Mars C, Photon, and Photon s.
02 Uniform 360-Degree Curing with 16 UV LEDs
Post-curing is critical to developing the full tensile strength and surface hardness of photopolymer components. The station incorporates a built-in array of 16 individual 405nm UV LEDs arranged vertically along the rear tower. When switched to curing mode, the machine engages a 360-degree rotating turntable that slowly spins models through the ultraviolet light beam. This omnidirectional movement ensures that light reaches complex model geometries, overhangs, and deep recesses without creating under-cured, tacky spots or overexposed, brittle zones.
Operating noise is also kept to a minimum due to an engineered fan-less curing mode. Without mechanical cooling fans buzzing on the chassis during the UV exposure cycle, desktop operators can run hardening sequences in shared offices or quiet maker spaces without auditory distraction. This balanced light delivery complements modern resin gear, bridging older hardware like the Mars 2 Pro with updated devices such as the elegoo mars 5.
03 Sealed Cleaning Container and Protective Anti-UV Lid
Volatile organic compounds and alcohol vapors represent major challenges during prolonged post-processing routines. The ELEGOO Mercury Plus 2.0 includes a sealed washing bucket fitted with a tight-fitting rubber gasket. This sealed construction stops high-percentage isopropyl alcohol from evaporating into ambient room air between print runs, preserving solvent volume and keeping workspace air cleaner. Containing these fumes is essential for hobbyists working in basement workshops, bedrooms, or poorly ventilated garage spaces.
Surrounding the entire work area is a heavy-duty yellow anti-UV lid designed to block 99.95% of ultraviolet rays emitted during the curing phase. This protective cover safeguards eyesight from direct exposure to intense 405nm light while still allowing users to visually monitor the model as it spins on the reflective turntable. The machine also incorporates a safety interlock sensor that immediately halts UV emission if the yellow cover is lifted mid-cycle, eliminating accidental flash exposure.
04 Intuitive Front TFT Display and Timer Controls
Controlling cycle duration should not require navigating confusing sub-menus, especially when wearing messy nitrile gloves. The front panel features a clear TFT screen that directly communicates operating states by displaying the programmed cycle time alongside real-time countdown progress. Operators can adjust treatment durations to match small jewelry pieces, hollowed terrain, or dense mechanical brackets using straightforward push-button inputs.
Once a cycle is configured, the machine operates autonomously and stops automatically when the countdown reaches zero. This precise duration management prevents over-curing, which often causes pale discoloration or micro-cracking in sensitive photopolymers. Whether cleaning residual resin or executing final UV exposure, the digital timer ensures exact reproducibility across production runs.
03 Specs
| Attribute | Detail |
|---|---|
| Product Name | ELEGOO Mercury Plus 2.0 Wash and Cure Station |
| Brand | ELEGOO |
| Light Source | 16 pcs 405nm UV LED |
| Curing Platform | 360-degree rotating turntable |
| Curing Noise Level | Fan-less quiet curing mode |
| UV Protection | Anti-UV lid blocking 99.95% of ultraviolet rays |
| Control Interface | Front TFT digital display screen |
| Washing Modes | Basket washing and build plate suspended washing |
| Printer Compatibility | ELEGOO Mars, Mars Pro, Mars C, Anycubic Photon, Photon s, and similar LCD/DLP/SLA printers |
| Dimensions and Weight | The listing does not specify |
04 ELEGOO Mercury Plus 2.0 Pros and Cons
Pros
- Dual washing modes supporting build plate mounting
- Protective anti-UV lid blocking 99.95% of rays
- Sixteen 405nm UV LEDs with 360-degree turntable
- Sealed wash bucket prevents solvent evaporation
- Quiet fan-less mode during curing cycles
Cons
- Not recommended for water washable resins
- Machine dimensions not specified in listing
05 Best Use Cases
- Streamlining daily post-processing workflows for owners using an elegoo mercury plus 2.0 for elegoo mars 2 pro printing setup.
- Washing delicate miniature figurines and thin-walled scale models inside the suspended basket without mechanical damage.
- Mounting entire build platforms directly into solvent to prevent touching uncured photopolymer resin with bare skin.
- Curing functional mechanical prototypes evenly using the 360-degree turntable and 16-diode UV array.
- Maintaining an odorless, safe desktop workshop environment by sealing volatile cleaning solvents within an airtight bucket.
06 Before You Buy
When matching this post-processing station to your printing station, checking printer compatibility is essential. The listing states the unit works seamlessly with compact desktop resin printers such as the ELEGOO Mars, Mars Pro, Mars C, Anycubic Photon, and Photon s. However, if you are scaling up to large-format resin platforms like the elegoo jupiter 2, the build plates and larger print volumes will exceed the physical limits of this wash container and curing turntable. Keep in mind that for elegoo mars 2 pro specs, the standard build plate fits comfortably into the adjustable suspension bracket, but larger third-party plates will require detaching prints into the wire basket.
Shoppers must also consider resin chemistry and hardware specifications. The listing contains an explicit special note stating that the washing function is not quite suitable for 3D models printed with water washable resin, which is better washed using running water. Regarding physical footprint, the listing does not specify the exact elegoo mercury plus 2.0 dimensions, overall machine weight, power wattage, or liquid container volume capacity. Additionally, the listing does not specify whether extra cleaning containers, replacement stirrers, or spare wash baskets are included in the standard retail package.
07 How It Compares With Similar Picks
| Product | Best For | Key Difference |
|---|---|---|
| ELEGOO Mercury Plus 2.0 | Resin print washing and UV curing | Dedicated 2-in-1 post-processing station with 16 UV LEDs and sealed wash tank |
| MakerWorld Model Library | Multi-color FDM printing workflows | Bambu Lab P1S Combo CoreXY FDM printer bundle with AMS rather than a resin station |
| FLASHFORGE Adventurer 5M 3D Printer | High-speed enclosed filament fabrication | Standalone CoreXY FDM printer with 600mm/s speed, 280°C nozzle, and auto leveling |
| Beginner-Friendly Ecosystem with MakerWorld Model | Enclosed CoreXY filament printing | Bambu Lab P1S standalone FDM machine designed for filament printing without resin washing |
Choosing between these options depends entirely on your production pipeline. While the ELEGOO Mercury Plus 2.0 is an automated post-processing accessory built specifically for curing and washing liquid photopolymers, alternatives like the Bambu Lab P1S bundles and Flashforge machines are standalone FDM printers that melt plastic filaments. If your objective is eliminating resin wash bottles, sticky scrapers, and handheld UV flashlights, the Mercury Plus 2.0 is the targeted tool for that task. If you want to bypass chemical resin post-processing entirely in favor of spool-fed plastic printing, an FDM alternative would be the proper choice.
08 Bottom Line
Is elegoo mercury plus 2.0 worth it for Mars 2 Pro operators? For anyone tired of dealing with messy isopropyl baths, uneven surface hardening, and chemical spills, the answer is a definitive yes. By unifying the wash and cure phases into an automated system with a 360-degree turntable, 16 405nm LEDs, and an airtight bucket, this machine turns what used to be the messiest part of 3D printing into an orderly, predictable process.
Although it cannot wash water-washable resin parts effectively and physical dimensions remain unspecified on the listing, its direct build-plate mounting and fan-less quiet operation make it an exceptional companion for desktop resin setups. It saves hours of labor, preserves solvent life, and protects your eyes and lungs during daily production.
09 FAQ
Can I wash prints directly on the Elegoo Mars 2 Pro build plate?
Yes, the unit features an adjustable height platform bracket designed specifically to hold the build plate suspended inside the cleaning bucket. This setup allows you to clean parts without removing them from the plate first, preventing contact with uncured liquid resin.
Does the station wash water washable resin effectively?
According to the product listing, the washing function is not quite suitable for 3D models printed with water washable resin. The manufacturer recommends washing water-washable photopolymer parts under running water instead of circulating them inside the wash bucket.
How does the anti-UV cover protect users during operation?
The protective yellow lid blocks 99.95% of ultraviolet radiation generated by the 16 405nm UV LEDs during the curing process. This safeguards your vision from direct UV light while enabling you to monitor part rotation on the turntable.
Is the curing mode noisy during operation?
No, the unit features an engineered fan-less curing mode that eliminates fan whir and motor noise during light exposure cycles. This makes the machine noticeably quieter when operating on a desktop in an office or home studio.
Can the machine handle models from other resin printer brands?
Yes, the listing notes compatibility with a variety of SLA, DLP, and LCD printers, specifically mentioning the ELEGOO Mars series, Mars Pro, Mars C, Anycubic Photon, and Photon s.
