As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This h hallmark industries hallmark industries ma0419x 12a deep review looks at the Hallmark MA0419X-12A, a 2 HP submersible pump built for deep well applications. It delivers up to 35 GPM at a maximum head of 420 feet. The unit runs on 230V power and features a stainless steel housing for durability. Measuring 45 inches long and weighing 40 pounds, it is designed to be lowered directly into the water source. You get a robust motor and corrosion-resistant construction in a single package.

  • 2 HP motor provides strong lifting power
  • 35 GPM maximum flow rate for steady supply
  • 420 ft max head rating for deep wells
  • Stainless steel housing resists corrosion
  • 230V electrical requirement for efficient operation

Good fit for

You should consider this pump if you have a deep well with a lift of up to 420 feet. The 35 GPM output suits households needing consistent water pressure and volume. Its stainless steel construction makes it a solid choice for long-term submersion. If your system requires 230V power and you need a reliable, full-size submersible unit, this model fits your technical setup well.

Who can skip it

Skip this option if your well is shallow, as the 420 ft head rating is overkill. You must have a 230V power source available, as it does not run on standard 120V. If you need a higher flow rate than 35 GPM, this unit will not meet your demand. The 40-pound weight also requires proper handling equipment for installation. Look for a lighter, lower-head pump if your needs are modest.

Verdict

The Hallmark MA0419X-12A is a durable, high-head pump for deep wells needing 35 GPM. It suits users with 230V power and substantial lift requirements.

01 Key specs for this pump

Voltage: 230V

This pump requires a 230-volt electrical circuit to operate. You must ensure your home’s wiring supports this higher voltage level, which is common for heavy-duty appliances. Standard 120V outlets will not work here. Using the correct voltage prevents motor damage and ensures the pump runs efficiently without tripping breakers or causing electrical hazards in your well system.

Housing Material: Stainless Steel

The outer casing is made of stainless steel, which offers strong resistance to rust and corrosion from well water. This material choice helps the unit last longer in wet, underground environments. It protects internal components from water damage and mineral buildup. You benefit from reduced maintenance needs and a more durable pump that withstands harsh well conditions over time.

Max Head: 420 ft.

This rating indicates the maximum vertical distance the pump can push water, reaching up to 420 feet. If your well is deeper than this limit, the pump may struggle to deliver water or fail entirely. You should measure the depth from the pump location to the highest point in your plumbing system. Ensure your well depth stays within this safe operating range for reliable performance.

Max Flow Rate: 35 GPM

The pump can move up to 35 gallons of water per minute under ideal conditions. This volume supports multiple household fixtures running simultaneously, such as showers and faucets. It provides sufficient pressure for most family needs. You should compare this flow rate against your daily water usage requirements to ensure it meets your home’s demand without causing pressure drops or insufficient supply during peak times.

02 Stainless Steel Build and Dimensions

The Hallmark MA0419X-12A features a full stainless steel housing. According to the listing, this material choice provides strong resistance to corrosion and rust. This is critical for a submersible unit that sits at the bottom of a deep well. The stainless steel construction protects the internal components from the harsh, wet environment over many years of operation. You can expect the pump to maintain its structural integrity even when exposed to mineral-rich water or varying chemical levels.

In terms of physical layout, the unit measures 45 inches in length with a width and height of 3.8 inches. This slim, cylindrical profile is designed to fit into standard 4-inch or larger well casings. The compact diameter allows for easy installation in narrow spaces where bulkier pumps would not fit. The total weight is 40 pounds. This mass helps keep the pump stable at the bottom of the well, reducing vibration during operation.

The design prioritizes durability and fit. The stainless steel body ensures longevity, while the specific dimensions ensure compatibility with most residential deep well setups. You do not need to worry about complex mounting brackets or unusual installation requirements. The straightforward cylindrical shape makes it a practical choice for homeowners who need a reliable, long-lasting solution for accessing groundwater from significant depths.

03 Installation and Daily Operation

Setting up this pump requires careful attention to your electrical infrastructure. The unit operates on 230V, which is significantly higher than standard household outlets. You must verify that your home’s wiring supports this voltage level. Using a standard 120V circuit will not work and could damage the motor. Proper electrical preparation is the first step before lowering the unit into the well. The pump measures 45 inches in length and weighs 40 pounds. You will need appropriate lifting equipment to lower this full-size unit safely into the borehole. The stainless steel housing protects the internal components from corrosion, but handling requires care to avoid dents. Once installed, the pump delivers up to 35 gallons per minute. This flow rate depends on the depth of your well. The maximum head is listed at 420 feet. This specification indicates the vertical distance the pump can push water. If your well is deeper than 420 feet, the flow rate will drop significantly or stop entirely. Daily use involves the pump running automatically based on your water demand. The 2 HP motor provides the necessary power to maintain pressure. You should ensure the pump remains submerged to prevent overheating. The compact width of 3.8 inches allows it to fit into standard deep well casings. Regular maintenance involves checking the electrical connections and ensuring the intake is clear. The stainless steel construction reduces the need for frequent part replacements due to rust. This model is designed for continuous operation in deep well environments.

04 Before You Buy This Pump

You need to verify your electrical setup before ordering. This unit requires a 230V circuit, not standard 120V outlets. You must ensure your home wiring supports this higher voltage. The pump weighs 40 pounds and measures 45 inches long. You will need appropriate piping and fittings to connect it to your well system. The stainless steel housing resists corrosion, which helps longevity in wet environments. You should check the 3.8-inch diameter to confirm it fits your well casing. This pump is a heavy-duty component for water supply, not a filtration device. You will still need separate filtration systems for clean water. Consider your total water usage. The 35 GPM flow rate suits larger households. Verify your well depth is under 420 feet. This ensures the pump can lift water effectively. Plan for professional installation if you are unsure about electrical work. Proper setup prevents damage to the motor.

Check before you buy

  • Confirm your electrical panel supports 230V circuits.
  • Check your well casing diameter is at least 3.8 inches.
  • Verify your well depth is under 420 feet.
  • Ensure you have compatible piping for 35 GPM flow.
1
Hallmark 2 HP Stainless Steel Deep Well Pump

Hallmark 2 HP Stainless Steel Deep Well Pump

Best for: deep well water access

Horsepower
2 HP
Pump Type
Deep Well Submersible Pump
Max Flow Rate
35 GPM
Max Head
420 ft.
Voltage
230V
Housing Material
Stainless Steel

This deep well submersible pump delivers 35 GPM at 230V. Its stainless steel housing resists corrosion. The unit reaches a max head of 420 feet. It fits wells up to 3.8 inches wide. You get a robust 2 HP motor for steady water flow. This setup suits deep well installations requiring reliable performance.

Pros
  • 2 HP motor provides strong power output
  • 35 GPM max flow rate ensures good volume
  • Stainless steel housing offers durability
  • 420 feet max head depth capability
Cons
  • 40 pounds weight requires careful handling
  • 45 inches length needs vertical space
  • 230V voltage limits direct 120V use
Good fit if
  • You need a pump for wells over 200 feet deep
  • You require a 230V power source
  • You want a stainless steel build for corrosion resistance
Skip if
  • You only have 120V electrical outlets
  • You need a pump for shallow wells under 100 feet
  • You cannot support a 40 pound unit

Verdict: H Hallmark Industries 2 HP Submersible Pump fits deep well users needing 230V power and high flow rates. It delivers 35 GPM up to 420 feet head.

05 Specifications side by side

SpecHallmark 2 HP Stainless Steel Deep Well Pump
Horsepower2 HP
Pump TypeDeep Well Submersible Pump
Max Flow Rate35 GPM
Max Head420 ft.
Voltage230V
Housing MaterialStainless Steel
MaterialStainless Steel
Dimensions45 × 3.8 × 3.8 inches
Weight40 pounds
Sizefull size
ColorStainless Steel
ModelMA0419X-12A

06 Frequently asked questions

What is the maximum flow rate of the Hallmark MA0419X-12A pump?

This pump delivers up to 35 gallons per minute. This high flow rate supports heavy water usage for large households or agricultural needs. It maintains this output while pushing water up to a head of 420 feet. You get strong pressure even at significant depths.

Does the Hallmark MA0419X-12A require a specific voltage?

Yes, it operates on 230V power. You cannot plug this unit into a standard 120V household outlet. Your electrical system must support this higher voltage level. Using the correct power source ensures the 2 HP motor runs efficiently without damage or tripping breakers.

How long is the Hallmark MA0419X-12A submersible pump?

The unit measures 45 inches in length. This full-size design fits into deep well casings. You need to ensure your well diameter accommodates this 3.8-inch width and height. The length allows for sufficient motor and impeller stages for deep water access.

What material is the Hallmark MA0419X-12A pump made of?

It features a stainless steel construction. This material offers strong resistance to corrosion and rust. Since the pump sits at the bottom of a well, durability against water exposure is critical. Stainless steel helps maintain performance over time in submerged environments.

How much does the Hallmark MA0419X-12A weigh?

The pump weighs 40 pounds. This weight indicates a robust build suitable for deep well applications. You will need appropriate lifting equipment or a secure cable system for installation. The substantial mass helps keep the unit stable at the bottom of the well.

Is the Hallmark MA0419X-12A suitable for deep wells?

Yes, it is designed for deep well water access. It can push water up to a maximum head of 420 feet. This capability makes it ideal for homes or properties with significant well depth. The 2 HP motor provides the necessary power for these demanding conditions.

07 See also