As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you compare h hallmark industries pump vs hallmark industries ma0459x 14a deep, you see two submersible options from the same brand. Both use 230V power and stainless steel housings for durability. The main difference lies in their performance profiles. The Hallmark Industries 1 HP model prioritizes high water volume, while the MA0459X-14A focuses on lifting water from greater depths. Your choice depends on your well depth and flow needs.
Horsepower
1 HP
3/4 HP
Max Flow Rate
33 GPM
13 GPM
Max Head
207 ft
270 ft
Diameter
4 inches
3 inches
Length
32 inches
37 inches
Choose the first if
- You need a higher flow rate of 33 GPM for household use
- Your well depth is within 207 feet
- You prefer a wider 4-inch pump design
Choose the second if
- You require a deeper lift capacity up to 270 feet
- You have a narrow well casing requiring a 3-inch pump
- You prioritize head pressure over maximum volume
Verdict
Choose the 1 HP pump if you need more water volume for standard home usage. Select the MA0459X-14A if your well is deeper or narrower. Both units offer reliable stainless steel construction for long-term submersible use.
01 Performance and Build Comparison
Flow Rate
Edge: Hallmark Industries 1 HP Deep Well Pump
The Hallmark Industries 1 HP Deep Well Pump moves 33 gallons per minute. This high flow rate suits larger households or irrigation needs. The MA0459X-14A offers 13 gallons per minute. This lower output is sufficient for standard residential plumbing but limits simultaneous use. You get more water volume per minute with the 1 HP model. If you need rapid tank filling or high demand, the 1 HP pump is the clear choice. The MA0459X-14A prioritizes lift over volume.
Max Head
Edge: Hallmark MA0459X-14A 3-Inch Deep Well Pump
Lift capability differs significantly between these two units. The MA0459X-14A handles a maximum head of 270 feet. This allows it to pull water from deeper wells or higher elevation tanks. The 1 HP pump reaches 207 feet. While still impressive, it cannot match the vertical lift of the 14-stage model. If your well is very deep, the MA0459X-14A is the safer option. For shallower depths, both pumps perform adequately.
Horsepower
Edge: Hallmark Industries 1 HP Deep Well Pump
Power output defines the pump's strength. The 1 HP Deep Well Pump features a full 1 horsepower motor. This drives its higher flow rate. The MA0459X-14A uses a 3/4 horsepower motor. This is less powerful but often more energy-efficient for lighter loads. The 1 HP unit requires a built-in capacitor start and no external control box. The MA0459X-14A uses a 1-phase motor. Choose 1 HP for brute force, or 3/4 HP for moderate duty.
Dimensions
Edge: Hallmark MA0459X-14A 3-Inch Deep Well Pump
Physical size affects installation in narrow well casings. The MA0459X-14A has a diameter of 3 inches. It fits into 3-inch wells easily. The 1 HP pump is wider at 3.8 inches. It requires a 4-inch casing. The MA0459X-14A is also shorter at 37 inches compared to the 1 HP model's 32-inch length? Wait, the 1 HP is 32 inches long. The MA0459X-14A is 37 inches. The 1 HP pump is lighter at 28 pounds versus 23.9 pounds for the MA0459X-14A.
Construction
Edge: Tie
Both pumps use stainless steel housings for corrosion resistance. The 1 HP model adds a heavy-duty thermal plastic discharge. This protects the electrical components. The MA0459X-14A is a 14-stage design. This multi-stage impeller system contributes to its higher head pressure. Both are built for deep well submersible use. The 1 HP model is described as industrial grade. The MA0459X-14A is also robust. Both offer durable stainless steel bodies for long-term submersion.
02 Which Hallmark Pump Fits Your Needs
High flow irrigation needs
Our pick: Hallmark Industries 1 HP Deep Well Pump
Choose the 1 HP model if you need 33 gallons per minute. This higher output supports larger households or garden irrigation. The 207-foot max head handles moderate depths. You get a stainless steel body for durability. Note that it does not require a separate control box, which simplifies your installation process.
Deep well standard home use
Our pick: Hallmark MA0459X-14A 3-Inch Deep Well Pump
Select the MA0459X-14A for deeper wells up to 270 feet. It provides 13 gallons per minute, which is sufficient for standard residential plumbing. The 3-inch diameter fits tighter well casings. You get a 1-inch NPT outlet port for easy pipe connection. The 3/4 HP motor offers reliable performance for typical daily water needs.
Simpler electrical setup
Our pick: Hallmark Industries 1 HP Deep Well Pump
Opt for the 1 HP pump if you want to skip a control box. It has a built-in capacitor start for easier wiring. The 33 GPM flow rate ensures quick tank filling. The stainless steel construction resists corrosion. This model is ideal if your well depth is under 207 feet and you prioritize speed over maximum depth capability.
Hallmark Industries 1 HP Deep Well Pump
Best for: 230V deep well systems needing 33 GPM
- Horsepower
- 1 HP
- Pump Type
- Deep Well Submersible Pump
- Max Flow Rate
- 33 GPM
- Max Head
- 207 ft.
- Voltage
- 230V
- Housing Material
- Stainless Steel
This H Hallmark Industries submersible pump delivers 1 HP of power at 230V. It moves up to 33 GPM with a max head of 207 feet. The stainless steel body offers durability for deep well applications. You get a solid build without needing an external control box. It fits homes or light industrial use where 230V power is available.
- 1 HP motor provides strong performance
- 33 GPM max flow rate
- Stainless steel housing for durability
- Built-in capacitor start, no control box needed
- Heavier at 28 pounds
- Larger length at 32 inches
- Lower max head of 207 feet compared to competitors
- You need a 230V submersible pump
- You want a stainless steel build
- You prefer a pump without a separate control box
- You only have 115V power
- You need a max head over 207 feet
- You prefer a lighter or shorter pump
Verdict: H Hallmark 1 HP Deep Well Pump suits users needing a durable, heavy-duty submersible pump with a built-in capacitor. It is a solid choice for 230V deep well systems where 33 GPM flow is sufficient.
Hallmark MA0459X-14A 3-Inch Deep Well Pump
Best for: Deep wells requiring 13 GPM output
- Horsepower
- 3/4 HP
- Pump Type
- Deep Well Submersible Pump
- Max Flow Rate
- 13 GPM
- Max Head
- 270'
- Voltage
- 230V
- Housing Material
- Stainless Steel
This H Hallmark Industries submersible pump uses a 3/4 HP motor and 230V power to move water from deep wells. It delivers up to 13 GPM at a max head of 270 feet. The stainless steel housing protects the internal components. Its 3-inch width fits standard well casings. You should choose this model if you need reliable performance for residential deep well applications.
- 3/4 HP motor provides strong output
- 270-foot max head reaches deep wells
- Stainless steel housing resists corrosion
- 13 GPM flow rate supports household use
- 13 GPM flow rate is lower than the 33 GPM option on this list
- 23.9-pound weight is heavier than lighter alternatives
- 270-foot head is less than the 207-foot head of the 1 HP model
- You need a pump for a well deeper than 200 feet
- You want a stainless steel build for durability
- You require a 3-inch diameter pump for standard wells
- You need a flow rate higher than 13 GPM
- You are using a 115V electrical system instead of 230V
- You prefer a lighter pump under 20 pounds
Verdict: H Hallmark 3/4 HP Deep Well Pump offers solid deep-well performance with a durable stainless steel build. It fits homeowners who need a reliable 13 GPM output for wells up to 270 feet deep.
03 Specifications side by side
| Spec | Hallmark Industries 1 HP Deep Well Pump | Hallmark MA0459X-14A 3-Inch Deep Well Pump |
|---|---|---|
| Horsepower | 1 HP | 3/4 HP |
| Pump Type | Deep Well Submersible Pump | Deep Well Submersible Pump |
| Max Flow Rate | 33 GPM | 13 GPM |
| Max Head | 207 ft. | 270' |
| Voltage | 230V | 230V |
| Housing Material | Stainless Steel | Stainless Steel |
| Outlet Port Size | – | 1" NPT |
| Port Size | – | 1-Inch |
| Material | Stainless Steel | Stainless Steel |
| Dimensions | 32 × 3.8 × 3.8 inches | 37 × 4.5 × 4.5 inches |
| Weight | 28 pounds | 23.9 pounds |
| Size | Full | 3” |
| Color | Stainless Steel | Stainless Steel |
| Model | MA0414X-7A | MA0459X-14A |
04 Frequently asked questions
Is the 1 HP Hallmark pump suitable for deep wells?
Yes, the 1 HP Hallmark Industries pump is designed for deep well systems. It operates on 230V power and features a stainless steel construction for durability. This model is best for applications requiring a higher flow rate of 33 gallons per minute. Its robust build supports heavy-duty usage in residential or irrigation settings.
What is the difference in size between the two Hallmark pumps?
The 1 HP model is longer and slightly lighter than the MA0459X-14A. The 1 HP pump measures 32 inches in length and weighs 28 pounds. In contrast, the MA0459X-14A is 37 inches long but weighs 23.9 pounds. Both share a similar width, with the 1 HP model at 3.8 inches and the MA0459X-14A at 4.5 inches.
Does the MA0459X-14A pump have a specific port size?
Yes, the Hallmark MA0459X-14A Deep Well Pump features a 1-inch port size. This specification is relevant for connecting your plumbing system. The pump uses 230V power and is constructed from stainless steel. It is intended for deep wells requiring a steady output of 13 gallons per minute.
Can I use the 1 HP Hallmark pump for irrigation?
Yes, the 1 HP Hallmark Industries pump is well-suited for irrigation needs. It delivers a flow rate of 33 gallons per minute, which supports larger water demands. The unit runs on 230V and includes a stainless steel body for long-term reliability. This makes it a practical choice for garden or agricultural water supply.
Are both Hallmark pumps made of stainless steel?
Yes, both the 1 HP model and the MA0459X-14A are made of stainless steel. This material choice ensures resistance to corrosion and enhances durability in wet environments. Both units also operate on 230V power. The shared construction quality supports their use in demanding deep well applications.
Which Hallmark pump has a built-in capacitor?
The Hallmark Industries 1 HP Deep Well Pump includes a built-in capacitor. This component aids in the efficient operation of the motor. The pump delivers 33 gallons per minute and runs on 230V. Its stainless steel housing provides additional protection for the internal components during deep well operation.
Is the MA0459X-14A pump narrower than the 1 HP model?
No, the MA0459X-14A pump is actually wider than the 1 HP model. The MA0459X-14A has a width of 4.5 inches, while the 1 HP pump measures 3.8 inches in width. Both pumps share a similar height dimension relative to their overall length. The 1 HP model is shorter at 32 inches compared to the MA0459X-14A’s 37 inches.
