As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This apus 95000 btu 4 42 gpm vs 18kw 4 4 gpm tankless comparison helps you choose between propane and electric heating. Both units deliver similar flow rates for two to three fixtures. The main difference lies in the energy source and installation requirements. One uses propane gas, while the other relies on high-voltage electricity. You need to check your home infrastructure before deciding.

Fuel Type

Propane

Electric

Voltage

120V

240V

Heating Capacity

95,000 BTU

18kW

Dimensions

20.6" H x 13.3" W x 5.9" D

13.7" H x 11.4" W x 3.5" D

Temperature Range

95–140°F

86–131°F

Choose the first if

  • You have existing propane gas lines for easy connection
  • You need a higher maximum water temperature up to 140°F
  • You prefer a unit with built-in freeze protection sensors

Choose the second if

  • You have a 240V electrical circuit available for installation
  • You want the slimmest possible profile for tight spaces
  • You need precise temperature control with 1°F increments

Verdict

Choose the propane model if you want higher temperature output and simpler electrical needs. Pick the electric model if you need a more compact footprint and digital precision. Both provide endless hot water for multiple fixtures.

01 Propane Versus Electric Tankless Specs

Fuel source and voltage

Edge: APUS 95,000 BTU 4.42 GPM Indoor Propane Heater

Product A runs on propane gas and requires a standard 120V AC power connection for its electronics and control system. This setup allows you to use it in areas with existing gas lines while needing only a basic electrical outlet. Product B relies entirely on electricity, specifically requiring a 240V supply. It needs two 40A breakers and 8 AWG wire for proper installation. If your home lacks dedicated high-voltage circuits for electric heaters, Product A offers a more accessible power path. You must check your local utility infrastructure to see which fuel type is available and feasible for your installation site.

Heating capacity and power

Edge: APUS 95,000 BTU 4.42 GPM Indoor Propane Heater

The propane unit delivers 95,000 BTU of heating power, which is a substantial thermal output for rapid water heating. This high BTU rating supports its 4.42 GPM flow rate effectively. The electric model provides 18kW of power, which converts to approximately 61,000 BTU. While 18kW is strong for an electric tankless heater, the propane unit has a higher raw thermal capacity. This difference means the propane model may handle colder incoming water temperatures more easily in winter months. You should consider your local winter ground water temperature when deciding which heating power is sufficient for your needs.

Dimensions and footprint

Edge: APUS 18kW 4.4 GPM Tankless Water Heater

Product A measures 20.6 inches in height, 13.27 inches in width, and 5.91 inches in depth. It weighs 19.2 pounds. Product B is significantly more compact, measuring 13.7 inches high, 11.4 inches wide, and only 3.54 inches deep. It weighs 15.2 pounds. If you have limited wall space or need to mount the unit in a tight cabinet or closet, the electric model’s slim profile is a clear advantage. The propane unit is taller and slightly deeper, requiring more vertical clearance and wall area. Measure your installation space carefully before choosing based on physical size constraints.

Temperature control and display

Edge: Tie

Product A features an LED touchscreen and maintains temperature within ±1°F of your setting, adjustable from 95°F to 140°F. It uses smart CPU technology for steady output. Product B offers an LED display that allows you to set temperatures from 86°F to 131°F in precise 1°F increments. It also includes built-in memory to restore settings after power outages. Both units provide digital control and precise adjustments. Product B’s memory feature adds convenience for users who frequently experience power fluctuations. Product A’s higher maximum temperature of 140°F may be preferable for specific high-heat needs.

Efficiency and technology

Edge: APUS 18kW 4.4 GPM Tankless Water Heater

Product A achieves up to 98% thermal efficiency with a UEF of 0.81, using oxygen-free copper heat exchangers and segmented combustion. It claims 30% greater energy savings than conventional tank models. Product B boasts 99.8% thermal efficiency due to self-modulating technology that adjusts power to the actual flow rate, eliminating standby heat loss. Both units are highly efficient for their respective fuel types. The electric model’s near-perfect thermal efficiency rating suggests less energy waste during the heating process itself. You should factor in the cost of propane versus electricity in your area to determine real-world operating savings.

Safety and protection features

Edge: Tie

Product A includes multiple-layer safety protection and automatic freeze protection that activates when ambient temperatures drop below 41°F. It also requires draining if unused for long periods. Product B features a 6-layer safety protection system, including anti-leakage, overheat, and surge safeguards, along with separated water-electricity construction. Both units prioritize user safety with comprehensive protection mechanisms. Product A’s specific freeze protection is valuable for unheated spaces in cold climates. Product B’s separated water-electricity design offers an additional layer of electrical safety. Review the specific safety requirements for your installation environment to ensure proper protection.

02 Choose the right APUS heater

Users with existing propane lines

Our pick: APUS 95,000 BTU 4.42 GPM Indoor Propane Heater

This model runs on propane, so you only need a standard 120V outlet for controls. It delivers 95,000 BTU and 4.42 GPM. The LED touchscreen lets you adjust temperature from 95°F to 140°F. Built-in freeze protection activates when ambient temperatures drop below 41°F. This setup fits homes with gas lines and avoids complex electrical upgrades.

Those wanting precise digital control

Our pick: APUS 18kW 4.4 GPM Tankless Water Heater

This electric unit features an LED display with 1°F increments from 86°F to 131°F. Self-modulating technology adjusts power to flow rate for 99.8% thermal efficiency. It includes memory to restore settings after outages. You must install 240V with two 40A breakers. The slim design saves space while delivering up to 4.4 GPM for simultaneous use.

Buyers needing easy installation

Our pick: APUS 95,000 BTU 4.42 GPM Indoor Propane Heater

This propane heater connects to a standard 120V AC outlet, avoiding heavy electrical work. It weighs 19.2 pounds and measures 20.6 inches high. The unit includes intelligent freeze protection to prevent damage. You get a 2-year warranty for peace of mind. This option simplifies setup for those without dedicated 240V circuits or professional electricians.

1
APUS 95,000 BTU 4.42 GPM Indoor Propane Heater

APUS 95,000 BTU 4.42 GPM Indoor Propane Heater

Best for: Indoor multi-fixture propane hot water needs

Fuel Type
Propane
Max Flow Rate
4.42 GPM
Heating Capacity
95,000 BTU
Installation Location
Indoor
Voltage
120V
Fixture Capacity
2–3 Fixtures

The APUS 95,000 BTU propane tankless heater delivers 4.42 GPM for 2–3 fixtures. It uses an oxygen-free copper heat exchanger for 98% efficiency. Smart CPU maintains temperature within ±1°F. The unit runs on 120V power and fits indoor spaces. It includes built-in freeze protection and an LED touchscreen for steady hot water.

Pros
  • 95,000 BTU heating capacity
  • 4.42 GPM max flow rate
  • 98% thermal efficiency with copper heat exchanger
  • Temperature stability within ±1°F
  • Built-in freeze protection activates below 41°F
Cons
  • Indoor installation only
  • Requires propane fuel supply
  • Heavier at 19.2 pounds than electric models
Good fit if
  • You need hot water for 2–3 fixtures simultaneously
  • You have access to propane gas indoors
  • You want steady temperature control within ±1°F
Skip if
  • You require outdoor installation
  • You need natural gas compatibility
  • You prefer electric power sources

Verdict: APUS 95k BTU Propane Tankless suits households needing high flow for multiple fixtures with precise temperature control. It fits indoor spaces where propane is available and steady hot water is essential.

2
APUS 18kW 4.4 GPM Tankless Water Heater

APUS 18kW 4.4 GPM Tankless Water Heater

Best for: Indoor whole-house hot water with precise temp control

Fuel Type
Electric
Max Flow Rate
Up to 4.4 GPM
Heating Capacity
18kW
Installation Location
Indoor
Voltage
240V
Fixture Capacity
2–3 Points

This APUS 18kW electric tankless water heater delivers up to 4.4 GPM at 240V. It features a slim 13.7 by 11.4 by 3.54 inch profile for wall mounting. The unit offers precise digital control from 86 to 131°F with 1°F increments. Its self-modulating technology ensures 99.8% thermal efficiency by adjusting power to flow rate. This model suits indoor whole-house or point-of-use installations where space is limited.

Pros
  • High 99.8% thermal efficiency via self-modulating power adjustment
  • Precise temperature control from 86 to 131°F in 1°F steps
  • Slim wall-mount design measuring 3.54 inches deep
  • Built-in memory restores settings after power outages
Cons
  • Requires two 40A breakers and 8 AWG wire for 240V operation
  • Heavier at 15.2 pounds compared to lighter alternatives
  • Limited to indoor installation only
Good fit if
  • You need a compact unit for tight indoor spaces
  • You want precise temperature control in 1°F increments
  • You have the electrical capacity for dual 40A breakers
Skip if
  • You require outdoor installation capability
  • You cannot install a 240V dual-circuit electrical setup
  • You prefer propane fuel sources over electric

Verdict: APUS 18kW Electric Tankless Heater provides precise digital temperature control and high efficiency for indoor use. It fits buyers with adequate 240V electrical capacity who value space-saving wall mounting.

03 Specifications side by side

SpecAPUS 95,000 BTU 4.42 GPM Indoor Propane HeaterAPUS 18kW 4.4 GPM Tankless Water Heater
Fuel TypePropaneElectric
Max Flow Rate4.42 GPMUp to 4.4 GPM
Heating Capacity95,000 BTU18kW
Installation LocationIndoorIndoor
Voltage120V240V
Fixture Capacity2–3 Fixtures2–3 Points
Temperature Range95–140°F86–131°F
FeaturesTanklessTankless, LED Display
Wattage–18 kW
Dimensions5.9 × 5.9 × 20.6 inches11.4 × 11.4 × 13.7 inches
Weight19.2 pounds15.2 pounds
ColorPropane Gas,4.42GPM,95,000BTU,Space GrayGray
ModelAP-AWH-Q13LPGAP-ADSK180-H18

04 Frequently asked questions

Can I install the APUS 95,000 BTU propane heater indoors?

Yes, the APUS 95,000 BTU model is designed for indoor installation. It requires a propane gas supply and a standard 120V outlet for its control system. The unit measures 5.9 by 20.6 by 5.9 inches and weighs 19.2 pounds. This compact size allows for flexible placement in your home.

Does the APUS 18kW electric heater need a special electrical setup?

Yes, the APUS 18kW unit requires a 240V electrical connection. It draws 18 kW of power to heat water efficiently. You must ensure your home has the necessary electrical capacity for this voltage. The unit includes an LED display for temperature control and fits indoor spaces with adequate wiring.

Which tankless heater is lighter and easier to mount?

The APUS 18kW electric heater is lighter. It weighs 15.2 pounds, while the propane model weighs 19.2 pounds. The electric unit also has a more compact footprint, measuring 11.4 by 13.7 by 11.4 inches. This makes it easier to mount on a wall in smaller spaces.

Do both units provide similar hot water flow rates?

Yes, both units offer nearly identical flow rates. The propane model delivers 4.42 GPM, and the electric model provides 4.4 GPM. This similarity means you can expect comparable performance for running multiple fixtures simultaneously. The choice depends more on your fuel source and installation needs than on flow rate.

What temperature range can I adjust on these heaters?

The propane model allows you to adjust the temperature from 95°F to 140°F using its LED touchscreen. The electric model also features precise digital temperature control via its LED display. Both units let you set specific water temperatures to suit your household needs.

Is the APUS 18kW suitable for whole-house use?

Yes, the APUS 18kW electric heater is suitable for whole-house hot water needs. It provides 4.4 GPM, which supports multiple fixtures. The unit is designed for indoor use and offers precise temperature control. Ensure you have the required 240V electrical capacity before installation.

05 See also