As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing between a vevor deep well submersible pump vs well hand pitcher pump depends on your water source depth and power access. Both units deliver water from underground sources but operate on entirely different principles. The submersible model uses electricity to push water up from deep wells, while the hand pump relies on manual effort for shallow lifts. You need to match the device to your well’s depth and your desire for automated versus manual operation.
Pump Type
Deep Well Submersible Pump
Hand pitcher pump
Max Head
427 ft
20 ft
Power Source
Electric (230V)
Manual
Max Flow Rate
37 GPM
not listed
Housing Material
Stainless steel
Cast iron
Choose the first if
- You have a deep well exceeding 20 feet in depth
- You need high-volume water flow for irrigation or household use
- You have access to 230V electricity at the well site
Choose the second if
- You are pumping from a shallow well or pond under 20 feet deep
- You need a water source during power outages or in off-grid locations
- You want a decorative outdoor fixture that requires no electrical wiring
Verdict
The submersible pump is the practical choice for deep wells and high water demand. The hand pitcher pump suits shallow sources and situations where electricity is unavailable. Select the model that matches your well depth and power availability.
01 Submersible vs Hand Pump Specs
Power source
Edge: Tie
The VEVOR 2HP Deep Well Submersible Pump relies on 230V electricity to operate. It includes a 33 ft electric cord for connection. This model requires a power source to function. In contrast, the VEVOR Antique Cast Iron Well Pump is a manual hand pitcher pump. It requires no electricity. You pump water by moving the handle up and down. This makes the hand pump suitable for locations without grid power access. The submersible unit offers automated operation, while the hand pump provides independence from electrical grids.
Water depth
Edge: VEVOR 2HP Deep Well Submersible Pump
Depth capability differs significantly between these two models. The VEVOR 2HP Deep Well Submersible Pump handles deep water sources with a max head of 427 ft. It is designed for wells with 4 inch casing or larger. The VEVOR Antique Cast Iron Well Pump is built for shallow wells or well points. It lifts water from depths up to 20 ft. If your water table is deep, the submersible pump is the only viable option. For shallow groundwater levels, the hand pump is sufficient and simpler to install.
Flow rate
Edge: VEVOR 2HP Deep Well Submersible Pump
Water output volume varies greatly. The VEVOR 2HP Deep Well Submersible Pump delivers a max flow of 37 GPM. This high volume supports irrigation, farm use, or whole-house supply. The VEVOR Antique Cast Iron Well Pump does not list a specific GPM rating. As a manual device, flow depends on your pumping speed. It is best for filling buckets or small-scale garden use. If you need rapid water delivery for sprinklers or large tanks, the submersible pump provides consistent high volume. The hand pump is slower and labor-intensive.
Build material
Edge: Tie
Construction materials affect durability and weight. The VEVOR 2HP Deep Well Submersible Pump features a stainless steel frame, including the outlet and connecting components. It has an IP68 waterproof grade and copper motor. The VEVOR Antique Cast Iron Well Pump is crafted from cast iron with a rust-resistant coating. It is heavier at 58.6 pounds compared to the 38-pound submersible unit. Both materials resist corrosion. The cast iron build offers a vintage aesthetic, while the stainless steel submersible unit is built for long-term underwater operation.
Filtration
Edge: VEVOR 2HP Deep Well Submersible Pump
Built-in filtration helps protect the pump and water quality. The VEVOR 2HP Deep Well Submersible Pump includes a stainless steel filtration mesh. It also has a built-in check valve to prevent back-flow. You can add gauze for new wells with sediment. The VEVOR Antique Cast Iron Well Pump does not list any built-in filtration or mesh. It relies on external filters if needed. If you want immediate protection against impurities from the pump itself, the submersible model has a clear advantage. The hand pump requires you to manage filtration separately.
02 Which VEVOR pump suits your needs
Users with deep wells and electric power
Our pick: VEVOR 2HP Deep Well Submersible Pump
This submersible pump handles depths up to 427 ft with a 37 GPM flow rate. Its 2HP motor and 230V power supply deliver consistent water pressure for homes or irrigation. The stainless steel construction resists corrosion, and the built-in check valve prevents backflow. You get reliable performance for deep water sources without manual effort.
Off-grid users with shallow water sources
Our pick: VEVOR Antique Cast Iron Well Pump
This hand pitcher pump lifts water from up to 20 ft deep without electricity. Its cast iron build withstands harsh outdoor conditions. The labor-saving handle reduces strain during use. Installation is simple with a standard 1-1/4 in NPT connection. It is ideal for shallow wells or ponds where power access is limited.
Buyers wanting decorative outdoor water access
Our pick: VEVOR Antique Cast Iron Well Pump
The antique cast iron design serves as a garden decoration when not in use. It fits ponds, campsites, and yards. The hook spout allows you to hang a bucket securely. This manual pump offers a classic look while providing functional water access. It requires no wiring or complex setup.
VEVOR 2HP Deep Well Submersible Pump
Best for: deep well irrigation and high flow
- Horsepower
- 2 HP
- Pump Type
- Deep Well Submersible Pump
- Max Flow Rate
- 37 GPM
- Max Head
- 427 ft
- Voltage
- 230V
- Housing Material
- Stainless steel
This VEVOR deep well submersible pump delivers 37 GPM flow and 427 ft head pressure. It features a 2 HP motor, 230V power, and a stainless steel housing. The unit includes a 33 ft cord and 4-inch diameter design. It suits users needing high-volume water extraction from deep wells or reservoirs for irrigation and home use.
- 37 GPM max flow rate
- 427 ft max head height
- Stainless steel housing for corrosion resistance
- Built-in overheat protection motor
- 33 ft electric cord included
- Heavier build at 38 pounds
- Requires 230V electrical supply
- 4-inch diameter fits only larger casings
- You need high flow for irrigation
- You have a deep well system
- You require a 230V power source
- You only have a 4-inch casing
- You need a manual hand pump
- You lack 230V electrical access
Verdict: VEVOR 2HP Deep Well Submersible Pump provides robust power for deep water extraction. It fits users with 230V access and large well casings who need high flow rates for irrigation or home supply.
VEVOR Antique Cast Iron Well Pump
Best for: shallow wells and vintage outdoor decor
- Pump Type
- Hand pitcher pump
- Max Head
- 20 ft
- Housing Material
- Cast iron
- Installation Location
- Outdoor
- Dimensions
- 15.8 × 9.45 × 50.8 inches
- Weight
- 58.6 pounds
This VEVOR hand pitcher pump is a manual, non-electric water solution for shallow wells up to 20 feet deep. It features a durable cast iron housing with a rust-resistant coating and a labor-saving handle designed for comfortable use. The unit stands 50.8 inches tall and weighs 58.6 pounds. It connects via a standard NPT 1-1/4 inch fitting for quick installation. It suits users seeking a vintage aesthetic and reliable off-grid water access.
- Max head of 20 ft for shallow well lifting
- Cast iron build with rust-resistant coating
- Labor-saving handle fits the palm curve
- Standard NPT 1-1/4 in connection
- Vintage antique design for outdoor decoration
- Max head of 20 ft limits depth
- Weight of 58.6 pounds adds bulk
- Manual operation requires physical effort
- You need a manual pump for shallow wells
- You want a decorative outdoor water feature
- You prefer off-grid water access without electricity
- You require high-volume water delivery
- You need to pump from deep wells
- You want an electric motor for automation
Verdict: VEVOR Cast Iron Hand Pitcher Pump is a sturdy, manual option for shallow wells. It fits buyers who value vintage style and off-grid reliability over high flow rates.
03 Specifications side by side
| Spec | VEVOR 2HP Deep Well Submersible Pump | VEVOR Antique Cast Iron Well Pump |
|---|---|---|
| Horsepower | 2 HP | – |
| Pump Type | Deep Well Submersible Pump | Hand pitcher pump |
| Max Flow Rate | 37 GPM | – |
| Max Head | 427 ft | 20 ft |
| Voltage | 230V | – |
| Housing Material | Stainless steel | Cast iron |
| Outlet Port Size | 1-1/4" NPT | – |
| Target Contaminant | – | Iron |
| Application | Irrigation | – |
| Fuel Type | Electric | – |
| Installation Location | – | Outdoor |
| Material | Stainless Steel | Cast Iron |
| Intended Use | Home | – |
| Dimensions | 47.2 × 5.5 × 4.3 inches | 15.8 × 9.45 × 50.8 inches |
| Weight | 38 pounds | 58.6 pounds |
| Size | 4 x 42 in | 50.79 in |
| Color | Silver,black | Black |
| Model | Deep Well Submersible Pump | HC-1009 |
04 Frequently asked questions
Can the VEVOR hand pitcher pump handle deep wells?
No, this manual pump is designed for shallow wells only. It lacks the mechanical power to lift water from significant depths. The VEVOR Antique Cast Iron Well Pump is a hand-operated unit intended for surface-level access. If your water source is deep, you will need a motorized submersible option instead.
What material is the VEVOR hand pump made of?
The VEVOR hand pitcher pump is constructed from cast iron. This material provides durability and a vintage aesthetic suitable for outdoor decor. The sturdy build ensures reliability for manual operation. In contrast, the submersible pump uses stainless steel to withstand underwater conditions and resist corrosion.
How much space does the VEVOR hand pump take up?
The VEVOR Antique Cast Iron Well Pump measures 50.8 inches in height, 15.8 inches in length, and 9.45 inches in width. It weighs 58.6 pounds, making it a substantial fixture. You need adequate vertical clearance and floor space to accommodate its footprint near the wellhead.
Is the submersible pump suitable for irrigation?
Yes, the VEVOR 2HP Deep Well Submersible Pump is ideal for irrigation. It delivers high flow rates necessary for watering large areas. The unit is rated for home use and deep well applications. Its 230V electric motor provides the consistent pressure needed for garden or agricultural water supply.
What voltage does the VEVOR submersible pump require?
The VEVOR 2HP Deep Well Submersible Pump requires 230V electricity to function. It comes with a 33 ft electric cord for connection to your power source. You must have access to a 230V outlet to operate this unit. It does not work on standard 120V household circuits.
Can I use the hand pump indoors?
The VEVOR hand pump is intended for outdoor installation. Its cast iron construction and design are built for exterior environments. You can use it for shallow wells located outside your home. It is not designed for indoor plumbing systems or pressurized indoor water lines.
How heavy is the VEVOR submersible pump?
The VEVOR 2HP Deep Well Submersible Pump weighs 38 pounds. It measures 47.2 inches in length, 5.5 inches in width, and 4.3 inches in height. This weight allows it to be lowered into the well casing. You will need appropriate lifting equipment for installation and maintenance.

