As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing a vevor deep well submersible pump vs 1 6 hp shallow well system. Both units use stainless steel construction for durability and target irrigation or home water supply needs. The main difference lies in their design and power source. One is a submersible unit for deep wells running on 230V. The other is a surface jet pump with a pressure tank, designed for shallow wells and 120V outlets.
Pump Type
Deep Well Submersible
Shallow Well Jet Pump
Voltage
230V
120V
Max Flow Rate
37 GPM
1320 GPH
Max Head
427 ft
164 ft
Included Accessories
33 ft electric cord
5-gallon pressure tank
Housing Material
Stainless steel
304 stainless steel
Choose the first if
- You need to pump water from a well deeper than 164 feet.
- You require a higher flow rate measured in gallons per minute.
- Your electrical system supports 230V outlets.
Choose the second if
- You have a shallow well located near the water surface.
- You prefer a system with an integrated pressure tank for steady pressure.
- You need a pump that runs on standard 120V household power.
Verdict
Choose the deep well submersible pump if your well casing is four inches or larger and the water source is deep. Select the shallow well jet pump if you need an all-in-one surface solution with a pressure tank for easier residential pressure management.
01 Deep Well vs Shallow Specs
Power source
Edge: VEVOR 2HP Deep Well Submersible Pump
Product A runs on 230V, which is standard for deeper installations where higher voltage supports the motor's demands. Product B uses 120V, connecting to a standard household outlet. This makes the shallow well unit easier to install in typical residential settings without requiring specialized electrical work. You should choose the 230V model if your well casing requires that power level. The 120V option offers convenience for surface-level setups where standard wiring is already available.
Flow capacity
Edge: VEVOR 2HP Deep Well Submersible Pump
Product A delivers a maximum flow of 37 gallons per minute. This high volume is ideal for filling large tanks or supplying multiple fixtures simultaneously. Product B provides 1320 gallons per hour, which converts to roughly 22 gallons per minute. While sufficient for irrigation or single-fixture use, it moves less water than the submersible unit. If you need rapid water delivery for large-scale irrigation or a busy household, the deeper well pump offers a clear advantage in throughput speed.
Lift height
Edge: VEVOR 2HP Deep Well Submersible Pump
Product A is designed for deep wells, with a maximum head of 427 feet. It is built to pull water from significant depths without losing pressure. Product B has a maximum head of 164 feet, limiting it to shallow well applications. If your water source is deeper than 164 feet, the shallow well pump cannot reach it. You must select the deep well submersible model if your well depth exceeds the shallow unit's lift capability.
System integration
Edge: VEVOR 1.6 HP Stainless Steel Shallow Well Pump
Product B includes a 5-gallon pressure tank and an automatic pressure switch that starts at 20 PSI and shuts off at 40 PSI. This integrated system maintains consistent pressure and reduces pump cycling. Product A is a bare submersible unit with a built-in check valve but no external tank or pressure switch listed. You will need to purchase and install separate pressure management components for the deep well pump. The shallow well unit offers a more complete out-of-the-box solution for pressure maintenance.
Physical size
Edge: Tie
Product A is a long, narrow cylinder, measuring 47.2 inches in length and 4.3 inches in height, weighing 38 pounds. It fits into 4-inch or larger well casings. Product B is a compact surface unit, measuring 20.1 inches in length and 17.3 inches in height, weighing 31.3 pounds. It sits above ground or in a shed. If you have limited vertical space in a well, the slender submersible design is required. If you need a portable or easily accessible unit, the shallow well pump is smaller and lighter.
02 Which VEVOR pump fits your needs
You need high flow for deep wells
Our pick: VEVOR 2HP Deep Well Submersible Pump
This submersible pump delivers 37 GPM and a 427 ft head, making it ideal for deep water sources. Its 2 HP motor and 230V power handle demanding irrigation tasks. The stainless steel frame resists corrosion, ensuring long-term reliability in demanding environments where depth and volume matter most.
You want easy home pressure boost
Our pick: VEVOR 1.6 HP Stainless Steel Shallow Well Pump
This shallow well system includes a 5-gallon pressure tank and runs on standard 120V. It provides consistent pressure for household use without complex wiring. The automatic pressure switch manages cycling, extending pump life. It is a plug-and-play solution for homes needing reliable water pressure from shallow sources.
You prefer standard household wiring
Our pick: VEVOR 1.6 HP Stainless Steel Shallow Well Pump
Operating on 120V, this unit connects to standard outlets, simplifying installation for residential users. It pairs a 1.6 HP motor with a pressure tank for steady output. The 304 stainless steel head offers durability against rust. This setup avoids the need for specialized 230V circuits required by deeper well pumps.
VEVOR 2HP Deep Well Submersible Pump
Best for: deep wells requiring 230V power
- Horsepower
- 2 HP
- Pump Type
- Deep Well Submersible Pump
- Max Flow Rate
- 37 GPM
- Max Head
- 427 ft
- Voltage
- 230V
- Housing Material
- Stainless steel
This VEVOR deep well submersible pump delivers 37 GPM flow and 427 ft head at 230V. It features a 4-inch diameter stainless steel housing and a 33 ft cord. The copper motor includes overheat protection. It suits users needing high lift for deep wells or irrigation. The robust build targets long-term reliability in demanding water-lifting tasks.
- 2 HP motor provides 37 GPM max flow
- 427 ft max head for deep well applications
- Stainless steel housing resists corrosion
- Built-in check valve prevents back-flow
- 33 ft electric cord included
- Requires 230V power, limiting compatibility with standard 120V outlets
- Weighs 38 pounds, making it heavier to handle
- 4-inch diameter fits only 4-inch or larger well casings
- You need to lift water from a deep well over 100 feet
- You have a 230V electrical supply available
- You require a stainless steel build for corrosion resistance
- You only have a 120V power source
- Your well casing is smaller than 4 inches
- You need a shallow well pump under 50 feet
Verdict: VEVOR 2HP Deep Well Submersible Pump offers strong lifting power for deep wells, making it a solid choice for users with 230V power and large-diameter wells.
VEVOR 1.6 HP Stainless Steel Shallow Well Pump
Best for: residential garden irrigation and lawn watering
- Horsepower
- 1.6 HP
- Pump Type
- Shallow well jet pump
- Max Flow Rate
- 1320 GPH
- Max Head
- 164 ft
- Voltage
- 120V
- Housing Material
- 304 stainless steel
This VEVOR shallow well jet pump delivers up to 1320 GPH with a 164 ft max head. It includes a 5-gallon pressure tank and runs on 120V power. The 304 stainless steel head resists corrosion. You get automatic pressure control starting at 20 PSI. This unit suits residential irrigation and small farm use. It provides reliable water supply for lawn maintenance.
- 1320 GPH max flow rate for irrigation
- 164 ft max head height
- 304 stainless steel pump head
- 5-gallon pressure tank included
- Automatic thermal overload protection
- Lower 1.6 HP motor compared to the 2 HP competitor
- Heavier 31.3 lb build
- Lower 1320 GPH flow rate than 37 GPM models
- You need a shallow well solution for garden irrigation
- You want a 120V pump with a pressure tank
- You require corrosion-resistant stainless steel components
- You need deep well submersible performance
- You require higher than 1.6 HP power
- You need flow rates exceeding 1320 GPH
Verdict: VEVOR 1.6 HP Shallow Well Pump offers steady pressure for residential irrigation. It fits homeowners needing a 120V jet pump with a built-in tank.
03 Specifications side by side
| Spec | VEVOR 2HP Deep Well Submersible Pump | VEVOR 1.6 HP Stainless Steel Shallow Well Pump |
|---|---|---|
| Horsepower | 2 HP | 1.6 HP |
| Pump Type | Deep Well Submersible Pump | Shallow well jet pump |
| Max Flow Rate | 37 GPM | 1320 GPH |
| Max Head | 427 ft | 164 ft |
| Voltage | 230V | 120V |
| Housing Material | Stainless steel | 304 stainless steel |
| Outlet Port Size | 1-1/4" NPT | – |
| Application | Irrigation | Irrigation |
| Fuel Type | Electric | – |
| Material | Stainless Steel | Stainless Steel |
| Intended Use | Home | Home |
| Dimensions | 47.2 × 5.5 × 4.3 inches | 20.1 × 10.2 × 17.3 inches |
| Weight | 38 pounds | 31.3 pounds |
| Size | 4 x 42 in | 1.6HP |
| Color | Silver,black | Orange + Black |
| Model | Deep Well Submersible Pump | ZX11008 |
04 Frequently asked questions
Can the VEVOR 2HP deep well pump replace a shallow well unit?
No. The deep well pump is a submersible unit designed for wells with significant depth. It measures 47.2 inches long and requires 230V power. It is not a drop-in replacement for a 120V shallow well system. You must have the proper voltage and well depth to use it effectively.
Is the 1.6 HP shallow well pump suitable for large gardens?
Yes. This unit is intended for residential irrigation and lawn watering. It uses 120V power, which connects to standard household outlets. Its compact design and built-in tank provide steady pressure for typical garden needs without requiring specialized electrical infrastructure.
What is the size difference between the two pumps?
The deep well pump is much longer, measuring 47.2 inches, while the shallow well pump is shorter at 20.1 inches. The deep well unit is also narrower, with a width of 5.5 inches. The shallow well model is wider at 10.2 inches. Both fit standard well casings but serve different depths.
Do both pumps use stainless steel construction?
Yes. Both the 2HP deep well pump and the 1.6HP shallow well pump feature stainless steel materials. This construction helps resist corrosion and ensures durability for long-term use in water applications. You get consistent build quality regardless of which model you choose for your home irrigation.
Which pump requires a 230V electrical connection?
The VEVOR 2HP deep well submersible pump requires 230V power. This higher voltage supports the motor's demands for lifting water from greater depths. The shallow well unit operates on 120V, making it compatible with standard home outlets and easier to install in residential settings.
How heavy is the deep well submersible pump?
The deep well submersible pump weighs 38 pounds. Its dimensions are 4 x 42 inches, with a total length of 47.2 inches. The shallow well pump is lighter at 31.3 pounds. You should ensure your installation area can support the weight of the submersible unit.

