As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The VERIWIS 3/4 HP 115V Submersible Well Pump offers reliable performance for standard 4-inch wells. If you are looking for veriwis 4 submersible well pump alternatives, you might need different specifications. This model provides 32 GPM flow and 174 ft of head capacity with a 115V motor. It features a stainless steel housing and a 33-foot UL certified cord.

You may want a different option if your well requires higher horsepower or 230V power. Some users need a shallow well jet pump instead of a submersible unit. Others require greater lift capacity for deeper wells. The alternatives in this list were chosen because their specs overlap with the original. They cover various voltage types, flow rates, and head heights. This selection helps you find a pump that matches your specific well depth and power supply requirements.

01 How these pumps differ from the VERIWIS

VEVOR 1.5HP 4" Submersible Well Pump

The VEVOR 1.5HP pump offers significantly more power than the VERIWIS 3/4HP model. Its 1.5HP motor drives higher flow rates, making it better suited for large-scale irrigation or high-demand household use. Like the VERIWIS, it fits standard 4-inch wells and uses a stainless steel construction for durability. However, it lacks specific head and flow specifications in its data, so you must verify it meets your lift requirements. Choose this if you need stronger performance for garden or farm watering tasks. It shares the 115V electrical requirement, ensuring compatibility with your existing residential power supply without needing upgrades.

AQUASTRONG 1.6HP Shallow Well Jet Pump

The AQUASTRONG 1.6HP jet pump represents a different design approach compared to the submerged VERIWIS unit. Instead of sitting in the well, this shallow well jet pump sits above ground, which simplifies maintenance access. It features NSF certification, a detail not listed for the VERIWIS, which may matter for drinking water safety concerns. While the VERIWIS handles deep wells up to 174 feet, this jet pump is intended for shallow wells. It offers automatic pressure management, providing consistent water pressure without the need for a separate pressure tank system. Select this if your well is shallow and you prioritize certified material safety for household consumption.

TDR Venus 1HP Shallow Well Jet Pump

The TDR Venus 1HP jet pump is designed for shallow well applications, contrasting with the deep well capability of the VERIWIS. It functions as a booster pump, ideal for increasing pressure in irrigation systems or small homes. Its compact dimensions make it easier to install in tight spaces compared to the long, cylindrical VERIWIS submersible unit. Both pumps operate on 115V power and use stainless steel components to resist corrosion. However, the TDR Venus lacks the deep lift capacity of the VERIWIS. Choose this alternative if your water source is close to the surface and you need a simple, automatic pressure solution without submerging the equipment.

Hallmark Industries 1 HP Deep Well Pump

The Hallmark Industries 1 HP pump is built for deeper wells, reaching up to 207 feet, which exceeds the 174-foot limit of the VERIWIS. It requires 230V power, so you must check your electrical setup before purchasing, as the VERIWIS uses 115V. This pump includes a built-in control box, eliminating the need for a separate unit often required with other deep well systems. It shares the stainless steel construction for durability in harsh environments. If your well is deeper than 174 feet or you have 230V power available, this model provides greater lift capacity. It is a robust choice for users needing reliable performance in deeper residential or agricultural settings.

Hallmark 2 HP Stainless Steel Deep Well Pump

The Hallmark 2 HP pump offers the highest horsepower in this comparison, designed for wells exceeding 200 feet in depth. It requires 230V power, differing from the 115V VERIWIS. With a 2 HP motor, it provides stronger lift capacity for very deep water access. The stainless steel body ensures long-term durability in demanding conditions. This pump is larger and heavier than the VERIWIS, reflecting its industrial-grade capability. Choose this if your well depth is significant and you need maximum lifting power. It is not suitable for shallow wells or standard 115V circuits. This model is ideal for users who prioritize raw lifting strength over energy efficiency or shallow well compatibility.

Wassermann 1HP 230V Deep Well Pump

The Wassermann 1HP pump is a 230V submersible unit, requiring different electrical infrastructure than the 115V VERIWIS. It features a built-in control system, which simplifies installation by removing the need for external boxes. Like the VERIWIS, it uses a stainless steel housing for corrosion resistance and fits 4-inch wells. However, it lacks specific head and flow data in its listing, so you must verify its performance matches your needs. The Wassermann model is suited for users with 230V power who want a durable, all-in-one submersible solution. It offers a practical alternative for deep well irrigation where standard 115V power is unavailable or insufficient for the required depth.

#ProductBest forPrice
1VERIWIS 3/4 HP 115V Submersible Well Pump Best overallstandard 4-inch wells needing 115V power
2VEVOR 1.5HP 4" Submersible Well Pump Also greathigh-flow irrigation in 4-inch wells
3AQUASTRONG 1.6HP Shallow Well Jet Pump Best premiumshallow well irrigation and home water supply
4TDR Venus 1HP Shallow Well Jet Pump Best budgetshallow well pressure boosting and irrigation
5Hallmark Industries 1 HP Deep Well Pump Also great230V deep wells up to 207 feet
6Hallmark 2 HP Stainless Steel Deep Well Pump Also greatdeep wells requiring high lift capacity
7Wassermann 1HP 230V Deep Well Pump Also greatdeep well irrigation with 230V power
1Best overall
VERIWIS 3/4 HP 115V Submersible Well Pump

VERIWIS 3/4 HP 115V Submersible Well Pump

Best for: standard 4-inch wells needing 115V power

Horsepower
3/4 HP
Pump Type
Submersible well pump
Max Flow Rate
32 GPM
Max Head
174 ft
Voltage
115V
Housing Material
Stainless steel

The VERIWIS 4" Submersible Well Pump delivers 32 GPM flow with a 174 ft max head. Its 3/4 HP motor runs on 115V power. The stainless steel housing resists corrosion. This unit fits standard 4-inch wells. It suits users needing reliable pressure for irrigation or septic tasks. The included 33-foot cord adds reach.

Pros
  • 32 GPM max flow rate for steady water delivery
  • 174 ft max head capacity handles deep well lifts
  • Stainless steel construction resists corrosion and wear
  • 33-foot UL certified power cord for convenient reach
  • 3-year warranty coverage for long-term peace of mind
Cons
  • 3/4 HP motor provides less power than 1 HP or 1.5 HP competitors
  • 174 ft max head is lower than models offering 207 ft or 276 ft lift
  • 115V electrical requirement may limit use where 230V is standard
Good fit if
  • You need a pump for a standard 4-inch residential well
  • You require 115V compatibility for easy home installation
  • You want a stainless steel build for corrosion resistance
Skip if
  • You need more than 32 GPM for high-demand irrigation
  • You require a head capacity exceeding 174 ft
  • You prefer a 1 HP or higher motor for heavier loads

Verdict: VERIWIS 4" Submersible Well Pump 3/4HP fits users with 4-inch wells who need 115V power and moderate lift. It offers solid stainless steel durability for residential water transfer tasks.

2Also great
VEVOR 1.5HP 4" Submersible Well Pump

VEVOR 1.5HP 4" Submersible Well Pump

Best for: high-flow irrigation in 4-inch wells

Horsepower
1.5 HP
Pump Type
Deep Well Submersible Pump
Max Flow Rate
37 GPM
Max Head
276 ft
Voltage
115V
Housing Material
Stainless steel

This VEVOR unit is a 4-inch deep well submersible pump with 1.5 horsepower and 115V power. It delivers a max flow of 37 GPM and a max head of 276 feet. The stainless steel frame and copper motor offer durability for home irrigation. It includes a 33-foot cord and external control box. You get reliable performance for extracting water from deep wells or reservoirs.

Pros
  • 1.5 HP motor provides strong lifting power
  • 37 GPM max flow rate for steady supply
  • 276 ft max head reaches deep water sources
  • Stainless steel housing resists corrosion and rust
  • Includes external control box for easy management
Cons
  • 115V voltage requires specific electrical setup
  • 29 pounds weight adds bulk to installation
  • 33 ft cord may need extension for deeper wells
Good fit if
  • You need high flow for garden irrigation
  • You have a 4-inch well casing
  • You prefer stainless steel durability
Skip if
  • You only have 230V electrical outlets
  • You need a pump lighter than 29 pounds
  • You require more than 276 ft head depth

Verdict: VEVOR 1.5HP 4" Submersible Well Pump suits homeowners needing strong flow for irrigation. It fits users with 4-inch wells who want durable stainless steel construction.

3Best premium
AQUASTRONG 1.6HP Shallow Well Jet Pump

AQUASTRONG 1.6HP Shallow Well Jet Pump

Best for: shallow well irrigation and home water supply

Horsepower
1.6 HP
Pump Type
Shallow well jet pump
Max Flow Rate
1340 GPH
Max Head
164 ft
Voltage
115V
Housing Material
Stainless steel

This AQUASTRONG shallow well jet pump delivers 1340 GPH at a max head of 164 ft. It features a stainless steel housing and NSF certification for safe drinking water applications. The unit includes a 5-gallon pressure tank and automatic pressure switch. You get a 1.6 HP motor with thermal overload protection. It suits garden irrigation and home water supply needs.

Pros
  • NSF Certified for drinking water safety
  • Stainless steel casing resists corrosion
  • 1340 GPH max flow rate
  • Includes 5-gallon pressure tank
  • Thermal overload protection prevents motor damage
Cons
  • Lower max head of 164 ft compared to deep well alternatives
  • Smaller max flow of 1340 GPH versus higher-capacity pumps
  • Larger physical footprint at 22.6 inches in length
Good fit if
  • You need a pump for shallow well or garden irrigation
  • You require NSF certification for drinking water use
  • You want automatic pressure control with a built-in tank
Skip if
  • You need to pump from a deep well over 164 ft
  • You require a higher flow rate than 1340 GPH
  • You prefer a more compact unit for tight spaces

Verdict: AQUASTRONG 1.6HP Stainless Steel Jet Pump is a solid choice for shallow well irrigation and domestic water supply. It fits users who prioritize NSF certification and automatic pressure management over deep well depth or high flow volume.

4Best budget
TDR Venus 1HP Shallow Well Jet Pump

TDR Venus 1HP Shallow Well Jet Pump

Best for: shallow well pressure boosting and irrigation

Horsepower
1 HP
Pump Type
Shallow well jet pump
Max Flow Rate
1080 GPH
Max Head
145 ft
Voltage
115V
Housing Material
Stainless steel, cast aluminum

This TDR Venus shallow well jet pump delivers 1080 GPH at 145 ft max head. It operates on 115V power with a stainless steel and cast aluminum build. The smart pressure switch handles automatic on/off control and dry run protection. You get a complete installation kit with adapters and clamps. It suits home pressure boosting and garden irrigation tasks well.

Pros
  • 1 HP motor provides 1080 GPH max flow
  • Stainless steel pump head resists corrosion
  • Smart pressure switch enables automatic operation
  • Includes check valve and hose adapters
  • Dry run protection safeguards the motor
Cons
  • 1080 GPH flow is lower than 32-37 GPM competitors
  • 145 ft max head is less than 207-276 ft rivals
  • 115V voltage limits use compared to 230V models
Good fit if
  • You need a shallow well jet pump for home pressure boosting
  • You want automatic dry run protection for peace of mind
  • You prefer a 115V unit for standard household outlets
Skip if
  • You require deep well performance with high head pressure
  • You need high flow rates exceeding 1080 GPH
  • You are installing a 230V deep well system

Verdict: TDR Venus 1HP Shallow Well Jet Pump fits homeowners needing reliable pressure boosting for shallow wells or gardens. It is a practical choice for users who value automatic control and corrosion-resistant materials over deep well capacity.

5Also great
Hallmark Industries 1 HP Deep Well Pump

Hallmark Industries 1 HP Deep Well Pump

Best for: 230V deep wells up to 207 feet

Horsepower
1 HP
Pump Type
Deep Well Submersible Pump
Max Flow Rate
33 GPM
Max Head
207 ft.
Voltage
230V
Housing Material
Stainless Steel

This Hallmark Industries deep well submersible pump offers 1 HP of power at 230V. It delivers a maximum flow rate of 33 GPM and a head of 207 feet. The stainless steel housing ensures durability for industrial or home use. You do not need an external control box because the capacitor is built in. This unit fits standard 4-inch well casings and provides reliable performance for your water supply needs.

Pros
  • 1 HP motor with 230V power
  • 33 GPM maximum flow rate
  • 207 feet maximum head
  • Stainless steel construction
  • Built-in capacitor, no control box needed
Cons
  • 207 feet head is lower than the 276 feet on the VEVOR model
  • 28 pounds weight is heavier than the 115V VEVOR pump
  • Requires 230V power, not compatible with standard 115V outlets
Good fit if
  • You need a 4-inch submersible pump for a deep well
  • You have a 230V power source available at the well site
  • You want a stainless steel body for corrosion resistance
Skip if
  • You only have 115V electrical outlets available
  • You need a head higher than 207 feet
  • You prefer a lighter pump for easier installation

Verdict: Hallmark Industries 1 HP 230V Submersible Pump suits users with 230V power who need a durable stainless steel pump for wells up to 207 feet deep. It is a solid choice for those who want to avoid buying a separate control box.

6Also great
Hallmark 2 HP Stainless Steel Deep Well Pump

Hallmark 2 HP Stainless Steel Deep Well Pump

Best for: deep wells requiring high lift capacity

Horsepower
2 HP
Pump Type
Deep Well Submersible Pump
Max Flow Rate
35 GPM
Max Head
420 ft.
Voltage
230V
Housing Material
Stainless Steel

This Hallmark Industries submersible pump is built for deep wells with a 420-foot max head. It delivers 35 GPM at 2 HP using 230V power. The stainless steel housing resists corrosion. You get a 40-pound unit that fits standard 4-inch wells. It suits users needing high lift capacity and durable materials for demanding water access.

Pros
  • 2 HP motor provides strong lifting power
  • 420-foot max head reaches deep wells
  • Stainless steel housing resists corrosion
  • 35 GPM flow rate supports high demand
Cons
  • 40-pound weight is heavier than lighter models
  • Requires 230V power, not 115V
  • 420-foot head exceeds many shallow well needs
Good fit if
  • You need to lift water from deep wells over 200 feet
  • You have 230V electrical access at the pump site
  • You want a stainless steel body for durability
Skip if
  • You only have 115V outlets available
  • You are pumping from a shallow well under 100 feet
  • You need a lightweight pump for frequent moving

Verdict: Hallmark Industries 2 HP Deep Well Pump handles deep water access with ease. You should choose it if your well depth exceeds 200 feet and you have 230V power.

7Also great
Wassermann 1HP 230V Deep Well Pump

Wassermann 1HP 230V Deep Well Pump

Best for: deep well irrigation with 230V power

Horsepower
1 HP
Pump Type
Deep Well Submersible Pump
Max Flow Rate
33 GPM
Max Head
190 ft
Voltage
230V
Housing Material
Stainless steel

This Wassermann submersible pump delivers 33 GPM at a 190 ft head using 1 HP of power on 230V. The stainless steel body and SS304 head offer durability for deep well applications. It includes a 10 ft cable and a built-in control box, eliminating the need for external units. The 1-1/4 inch FNPT outlet connects to standard piping. This unit fits 4 inch well casings and larger, making it a solid option for residential irrigation or groundwater extraction.

Pros
  • 1 HP motor provides 33 GPM flow rate
  • Stainless steel body and SS304 pump head for durability
  • Built-in control box eliminates need for external components
  • 230V/60HZ operation suits dedicated circuits
Cons
  • 190 ft max head is lower than the 276 ft and 207 ft options on this list
  • 28.7 lb weight is heavier than the 1 HP 230V competitor
  • 10 ft cable is shorter than the 33 ft UL cable on the top-ranked pump
Good fit if
  • You need a stainless steel pump for deep well irrigation
  • You have a 230V power source available
  • You want a unit with a built-in control box
Skip if
  • You require a max head exceeding 190 ft
  • You are using a 115V electrical system
  • You need a cable longer than 10 ft

Verdict: Wassermann 4" 1HP 230V Submersible Pump offers a durable stainless steel build and convenient built-in controls for users with 230V power. It suits those prioritizing corrosion resistance over maximum head height or cable length.

02 Specifications side by side

SpecVERIWIS 3/4 HP 115V Submersible Well PumpVEVOR 1.5HP 4" Submersible Well PumpAQUASTRONG 1.6HP Shallow Well Jet PumpTDR Venus 1HP Shallow Well Jet PumpHallmark Industries 1 HP Deep Well PumpHallmark 2 HP Stainless Steel Deep Well PumpWassermann 1HP 230V Deep Well Pump
Horsepower3/4 HP1.5 HP1.6 HP1 HP1 HP2 HP1 HP
Pump TypeSubmersible well pumpDeep Well Submersible PumpShallow well jet pumpShallow well jet pumpDeep Well Submersible PumpDeep Well Submersible PumpDeep Well Submersible Pump
Max Flow Rate32 GPM37 GPM1340 GPH1080 GPH33 GPM35 GPM33 GPM
Max Head174 ft276 ft164 ft145 ft207 ft.420 ft.190 ft
Voltage115V115V115V115V230V230V230V
Housing MaterialStainless steelStainless steelStainless steelStainless steel, cast aluminumStainless SteelStainless SteelStainless steel
Outlet Port Size1-1/4 inch FNPT1-1/4" NPT1" NPT–––1-1/4" FNPT
Installation Type–––Whole House–––
Features–––Booster Pump–––
Application–IrrigationIrrigationIrrigation––Irrigation
MaterialStainless SteelStainless SteelStainless SteelStainless SteelStainless SteelStainless SteelStainless Steel
Intended Use–HomeHomeHome––Home
Dimensions3.74 × 3.74 × 21.7 inches4 × 4 × 33.5 inches22.6 × 15.2 × 22.8 inches8.35 × 8.27 × 7.48 inches32 × 3.8 × 3.8 inches45 × 3.8 × 3.8 inches28.2 × 3.74 × 3.74 inches
Weight–29 pounds––28 pounds40 pounds28.7 pounds
Size174FT Head33.5 x 4 in––Fullfull size–
Color3/4hp 32gpm 174ftSilver,blackNsf Black–Stainless SteelStainless SteelStainless Steel
Model4SWP5.8-0.75/115VDeep Well Submersible PumpPGA150SANUP990MA0414X-7AMA0419X-12A4STM4-6/230

03 Frequently asked questions

Which submersible pump offers the highest flow rate for irrigation?

The VEVOR 1.5HP model provides the strongest flow for irrigation tasks. It features a 1.5HP motor and fits standard 4-inch wells. The stainless steel construction ensures durability during high-demand household use. This pump is ideal if you need more power than the VERIWIS 3/4HP offers for garden or farm watering.

What is the best option for shallow wells with 115V power?

The AQUASTRONG 1.6HP Shallow Well Jet Pump is designed for shallow wells. It operates on 115V power and includes NSF certification for safety. The automatic pressure management system simplifies home water supply. This jet pump is a solid choice for users prioritizing pressure control over deep well depth.

Can I use a 230V pump if my well is over 200 feet deep?

Yes, the Hallmark Industries 2 HP Deep Well Pump handles depths exceeding 200 feet. It requires 230V power and features a 45-inch stainless steel body. The 12-stage design provides high lift capacity for deep water access. This model is suitable for users with significant vertical lift requirements.

Which pump includes built-in controls to avoid a separate box?

The Hallmark Industries 1 HP Deep Well Pump includes integrated controls. It operates on 230V power and eliminates the need for a separate control box. The stainless steel build offers durability for wells up to 207 feet deep. This all-in-one design simplifies installation for residential water systems.

Is there a budget-friendly shallow well pump with automatic control?

The TDR Venus 1HP Shallow Well Jet Pump is a practical budget choice. It features automatic control and corrosion-resistant stainless steel materials. This pump is designed for pressure boosting in shallow wells or gardens. It suits homeowners who value reliable performance over deep well capacity or high flow volume.

Which submersible pump has a built-in control system for 230V systems?

The Wassermann 1HP 230V Deep Well Pump offers convenient built-in controls. It features a durable stainless steel build for corrosion resistance. This pump is ideal for deep well irrigation where 230V power is available. It prioritizes ease of use and material durability over maximum head height or cable length.

What pump fits a 4-inch well but needs more horsepower than 3/4HP?

The VEVOR 1.5HP 4-inch Submersible Well Pump fits standard 4-inch wells. It provides 1.5HP of power for higher flow rates than the VERIWIS model. The stainless steel construction ensures longevity for residential use. This option is best for users needing stronger performance for irrigation or high-demand household applications.

04 See also