As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This titan scr4 n 180 titan tankless review focuses on the SCR4 N-180 model. It is a compact water heating unit designed for point-of-use applications. The device delivers 18 kW of heating power. This capacity helps maintain consistent hot water flow for small fixtures. Its physical footprint is minimal, measuring just 3 inches wide. The unit stands 10.5 inches tall and 11.5 inches deep. These dimensions allow for easy installation in tight spaces. The stainless steel cover provides a durable exterior. You can connect water lines from below for flexible plumbing options.

  • 18 kW heating capacity for reliable hot water output
  • Compact dimensions of 3 x 10.5 x 11.5 inches
  • Stainless steel cover for durability
  • Water inlet and outlet positioned from below

Good fit for

This unit suits you if you need hot water for a single sink or small bathroom. The 18 kW rating is ideal for low-flow fixtures like vanity sinks. Its small size fits well under cabinets or in utility closets. The bottom connections simplify plumbing in confined areas. If you are replacing an old tank-style heater with limited space, this tankless option offers a direct upgrade without requiring major structural changes.

Who can skip it

You should look at another option if you require hot water for multiple simultaneous fixtures. This single unit cannot support showers or bathtubs effectively. The 18 kW capacity is insufficient for high-demand applications. If you need whole-house heating, you will need a larger system or multiple units. The compact design also means it lacks the volume of a traditional tank, which may not suit households with high water usage patterns.

Verdict

The Titan SCR4 N-180 is a practical choice for low-demand, point-of-use hot water needs. Its compact size and specific specs make it ideal for tight spaces and single fixtures.

01 Key specs for the Titan SCR4 N-180

Heating Capacity: 18 kW

This power rating indicates the unit can heat water quickly for point-of-use applications. It is suitable for small fixtures like hand sinks or coffee stations. You should compare this output to other tankless models to ensure it meets your flow rate needs. Higher kilowattage generally supports higher flow rates, so verify this matches your specific usage requirements.

Wattage: 18 kW

This value represents the electrical energy consumption during operation. It helps you estimate the load on your home’s electrical system. You must ensure your circuit can handle this draw. Compare this figure with other units to understand energy efficiency. It directly impacts how much electricity the device uses while providing hot water.

Color: Green

This describes the exterior finish of the unit. It may help the device blend into certain utility spaces or match existing decor. While not a performance metric, it is a visual detail to consider for installation aesthetics. Compare this with other available colors if matching your environment is a priority for your setup.

Width: 3 inches

This dimension indicates the narrow profile of the unit. It allows for installation in tight spaces or confined utility areas. You can fit this device where wider units cannot. Compare this width with other compact heaters to maximize your available space. It is a key factor for small point-of-use installations.

Height: 10.5 inches

This measurement shows the vertical size of the heater. It determines the clearance needed above and below the unit. You should check your installation area for sufficient vertical space. Compare this height with other models to plan your layout. It ensures the device fits properly without obstructing other components.

Length: 11.5 inches

This dimension defines the depth of the unit. It affects how far the device protrudes from the wall. You need adequate depth clearance for connections and maintenance. Compare this length with other tankless heaters to assess space requirements. It is essential for planning the physical footprint of your installation.

02 Design and build quality

The Titan SCR4 N-180 features a stainless steel cover. This material choice suggests durability and resistance to corrosion in damp environments. The unit is finished in green. This color may help it blend into utility spaces or mechanical rooms where aesthetics are secondary to function. The listing does not mention a digital display or external controls. You should assume operation relies on internal mechanisms or simple manual switches.

According to the listing, the physical dimensions are 3 inches wide, 10.5 inches high, and 11.5 inches long. This compact footprint allows for installation in tight spaces. You can mount it under sinks or in narrow cabinets. The small size supports its role as a point-of-use heater. It does not require the extensive plumbing or space that larger tank systems demand. The unit weighs nothing specific in the data, but its small volume implies it is light enough for one person to handle during installation.

Water inlet and outlet connections are located at the bottom. This layout simplifies piping runs in many standard installations. You can connect supply lines directly from below without complex overhead routing. This design reduces the number of elbows and fittings needed. It also keeps the unit lower to the ground, which may aid in stability. The bottom connections are a practical choice for under-counter placements. This feature makes the SCR4 N-180 suitable for specific retrofit projects where space is limited.

03 Installation and Daily Operation

Installation requires careful planning due to the unit’s specific dimensions and electrical needs. The Titan SCR4 N-180 measures 11.5 inches in length, 10.5 inches in height, and only 3 inches in width. This slim profile allows for mounting in tight spaces, such as under a sink or in a narrow utility closet. You must ensure your electrical panel can support the 77-amp draw required for 18 kW of power. This high current demand means dedicated heavy-gauge wiring is essential for safe operation.

The water inlet and outlet connections are located at the bottom of the unit. This design simplifies plumbing runs when mounting the heater low on a wall or under a counter. You will need to align the pipes correctly to avoid stress on the fittings. The stainless steel cover protects internal components from moisture and physical damage. This feature is practical for damp environments like basements or garages.

Daily use is straightforward. The tankless design heats water only when you turn on the faucet. This means no energy is wasted keeping a large tank of water hot. The 18 kW heating capacity ensures rapid temperature rise for point-of-use applications. You get hot water almost instantly for small fixtures. The green finish helps the unit blend into mechanical rooms. Maintenance is minimal, as there is no tank to flush or sediment to remove. You simply rely on the durable stainless steel exterior for long-term protection. This setup is ideal for those seeking efficient, on-demand hot water without the bulk of traditional heaters.

04 Check electrical and space needs first

Before you buy, consider how this unit fits your specific water needs. The 18 kW output is designed for point-of-use applications, such as under-sink installations or small fixtures. You must verify that your electrical panel can support the required 77 amps. This is a significant power draw, so professional installation is likely necessary to ensure safety and compliance with local codes. The compact dimensions allow for easy mounting in tight spaces, but you should check clearances for maintenance access. Since this is a tankless heater, it provides continuous hot water without storage limits. However, flow rates may vary depending on incoming water temperature. You should also consider pairing this unit with a filtration system if your water source has high sediment or hardness levels, as this can protect the heating elements and extend the lifespan of the stainless steel components. Always consult the manufacturer’s manual for specific wiring diagrams and voltage requirements before proceeding.

Check before you buy

  • Verify your electrical panel supports 77 amps
  • Confirm space for 3-inch width clearance
  • Check incoming water temperature for flow rate
  • Ensure professional installation is planned
1
Titan SCR4 N-180 18 kW Tankless Heater

Titan SCR4 N-180 18 kW Tankless Heater

Best for: compact single-point hot water needs

Heating Capacity
18 kW
Features
Tankless
Dimensions
11.5 × 3 × 10.5 inches

The Titan SCR4 N-180 is a compact tankless water heater designed for efficient on-demand heating. It delivers 18 kW of power to raise water temperature as it flows through the unit. The device measures 11.5 inches in length, 10.5 inches in height, and 3 inches in width, allowing for discreet installation. Its green stainless steel cover provides durability while maintaining a small footprint for tight spaces.

Pros
  • 18 kW heating capacity for reliable hot water output
  • Compact 3-inch width fits in tight spaces
  • Stainless steel cover for durability
  • Tankless design saves space
Cons
  • 18 kW power may struggle with high simultaneous demand
  • Small 3-inch width limits internal component size
Good fit if
  • You need a compact heater for tight spaces
  • You require a durable stainless steel exterior
  • You want a tankless system for space savings
Skip if
  • You need high capacity for multiple showers
  • You prefer a larger unit for easier maintenance
  • You require a model with higher wattage

Verdict: Titan SCR4 N-180 Tankless Heater suits small households needing compact, durable hot water solutions. Its 18 kW output works well for single-point use but may lag under heavy demand.

05 Specifications side by side

SpecTitan SCR4 N-180 18 kW Tankless Heater
Heating Capacity18 kW
FeaturesTankless
Wattage18 kW
Dimensions11.5 × 3 × 10.5 inches
ColorGreen
ModelN-180

06 Frequently asked questions

Is the Titan SCR4 N-180 suitable for a whole house?

No, it is designed for compact single-point hot water needs. The 18 kW output works well for small fixtures but may lag under heavy demand. It is best for under-sink installations rather than powering multiple showers or faucets simultaneously.

What are the exact dimensions of this unit?

The Titan SCR4 N-180 measures 11.5 inches in length, 10.5 inches in height, and 3 inches in width. Its slim profile allows for easy mounting in tight spaces, such as under a counter or in a small utility closet.

What color is the Titan SCR4 N-180?

The unit is finished in green. This color choice helps it blend into utility spaces or mechanical rooms where aesthetics are secondary to function. The stainless steel cover adds to its durable appearance in damp environments.

Does this model have a tank or is it tankless?

It is a tankless heater. This design means it heats water on demand rather than storing it in a large vessel. This feature saves space and reduces standby energy loss, making it ideal for point-of-use applications.

What is the heating capacity of the N-180?

The unit delivers 18 kW of heating power. This rating indicates it can heat water quickly for point-of-use applications. It is suitable for small fixtures like hand sinks or coffee stations where flow rates are low.

Is the Titan SCR4 N-180 durable?

Yes, it features a stainless steel cover. This material choice suggests durability and resistance to corrosion in damp environments. The build quality supports its use in utility spaces where exposure to moisture is common.

07 See also