As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Choosing between a 230V vs 115V well pump depends on your water source depth and power needs. Both the VEVOR and Aquastrong models use stainless steel housings for corrosion resistance and are intended for home irrigation. The main difference lies in their voltage and pump type. The VEVOR operates at 230V as a deep well submersible unit, while the Aquastrong runs on 115V as a shallow well jet pump. Your choice determines installation method and maximum flow capacity.

Voltage

230V

115V

Pump Type

Deep Well Submersible

Shallow Well Jet Pump

Max Flow Rate

37 GPM

1340 GPH

Max Head

427 ft

164 ft

Outlet Port Size

1-1/4" NPT

1" NPT

Certification

not listed

NSF Certified

Choose the first if

  • You need to pump water from a deep well over 164 feet.
  • You require a higher flow rate of 37 gallons per minute.
  • Your electrical system supports 230V circuits.

Choose the second if

  • You are pumping from a shallow well or surface water source.
  • You need NSF certification for drinking water safety.
  • Your electrical system only provides standard 115V outlets.

Verdict

Select the VEVOR 230V model if you have a deep well and need high-volume water delivery for irrigation. Choose the Aquastrong 115V jet pump for shallow sources where NSF certification and standard household voltage are priorities. Both units offer durable stainless steel construction suitable for home use.

01 Voltage, Head, and Flow Specs

Voltage and Power

Edge: VEVOR 2HP Deep Well Submersible Pump

The VEVOR pump operates on 230V with a 2 HP motor, while the Aquastrong unit runs on 115V with a 1.6 HP motor. Higher voltage typically allows for more efficient power delivery in demanding applications. The VEVOR’s 230V system is designed for deeper wells and heavier continuous loads. The Aquastrong’s 115V setup is standard for residential shallow well applications and easier to connect to typical home outlets. You should choose 230V if your electrical panel supports it and you need maximum power. Choose 115V for simpler installation in homes without dedicated high-voltage circuits.

Pump Type and Depth

Edge: VEVOR 2HP Deep Well Submersible Pump

These pumps serve different well depths. The VEVOR is a deep well submersible pump, designed to be lowered into wells with 4-inch casings. It handles significant vertical lift. The Aquastrong is a shallow well jet pump, intended for sources where the water level is closer to the surface. It uses suction to pull water up. The VEVOR reaches depths far beyond the Aquastrong’s capability. If your well is deep, the submersible design is necessary. For shallow wells or surface water sources, the jet pump is sufficient and easier to access for maintenance.

Maximum Head

Edge: VEVOR 2HP Deep Well Submersible Pump

Head refers to the vertical height water can be pushed. The VEVOR pump has a maximum head of 427 feet. This allows it to lift water from significant depths and push it to higher elevations in your home or storage tank. The Aquastrong pump has a maximum head of 164 feet. This limit suits shallow wells where the water table is near the surface. If you need to lift water more than 164 feet vertically, the Aquastrong cannot handle it. The VEVOR offers significantly greater lifting power for deep well applications.

Flow Rate

Edge: VEVOR 2HP Deep Well Submersible Pump

Flow rate determines how much water moves through the system. The VEVOR delivers a maximum flow of 37 gallons per minute (GPM). This high volume is ideal for filling large tanks or supplying multiple fixtures simultaneously. The Aquastrong provides 1340 gallons per hour (GPH). When converted, this is roughly 22 GPM. While lower than the VEVOR, it is still adequate for many residential uses like garden irrigation or single-fixture supply. The VEVOR wins on raw volume, but the Aquastrong may suffice for smaller households.

Outlet Port Size

Edge: VEVOR 2HP Deep Well Submersible Pump

The connection size affects pipe compatibility. The VEVOR features a 1-1/4 inch NPT outlet port. This larger diameter supports the high flow rate of 37 GPM with less friction loss. The Aquastrong has a 1 inch NPT outlet. This standard size is common for residential plumbing but restricts flow compared to the larger port. If you are piping water through long runs or large diameter pipes, the VEVOR’s port is better suited. The Aquastrong’s port is standard for typical home garden hoses and smaller pipes.

02 Which pump fits your water needs?

Deep well owners needing high flow

Our pick: VEVOR 2HP Deep Well Submersible Pump

You need deep water access with strong output. This 230V unit delivers 37 GPM and reaches 427 feet. The 2 HP motor handles demanding loads efficiently. Its stainless steel build resists corrosion in deep, wet conditions. You get a 33-foot cord for easier installation. This pump is built for serious lifting and steady performance.

Shallow well users wanting auto control

Our pick: AQUASTRONG 1.6HP Shallow Well Jet Pump

You prefer a complete system for shallow sources. This 115V jet pump includes a pressure tank and switch for automatic operation. It starts at 20 PSI and shuts off at 40 PSI. The 1.6 HP motor provides sufficient pressure for home use. You get easy installation with pre-assembled parts and garden hose adapters included.

Standard home irrigation on 115V

Our pick: AQUASTRONG 1.6HP Shallow Well Jet Pump

You want a simple setup for garden watering. This 115V model connects to standard outlets without needing 230V wiring. It offers 1340 GPH flow, which suits most residential sprinkler needs. The stainless steel casing ensures durability against rust. You benefit from a two-year warranty and built-in thermal protection for safe, quiet operation in your yard.

#ProductBest forPrice
1VEVOR 2HP Deep Well Submersible Pumpdeep wells needing 230V power
2AQUASTRONG 1.6HP Shallow Well Jet Pumpshallow well suction and garden irrigation
1
VEVOR 2HP Deep Well Submersible Pump

VEVOR 2HP Deep Well Submersible Pump

Best for: deep wells needing 230V power

Voltage
230V
Horsepower
2 HP
Pump Type
Deep Well Submersible Pump
Max Flow Rate
37 GPM
Max Head
427 ft
Housing Material
Stainless steel

This VEVOR deep well submersible pump runs on 230V power with a 2 HP motor. It delivers a maximum flow of 37 GPM and lifts water up to 427 feet. The stainless steel housing resists corrosion, and the 4-inch diameter fits standard well casings. You get a 33-foot cord and built-in protection against overheating. This unit suits users needing strong pressure for deep water sources.

Pros
  • 230V 2 HP motor for high performance
  • Stainless steel housing for corrosion resistance
  • 37 GPM max flow rate
  • 427 ft max head height
  • Built-in overheat protection
Cons
  • Heavier build at 38 pounds
  • Requires 230V electrical supply
  • 4-inch diameter limits casing compatibility
Good fit if
  • You need a pump for a deep well over 100 feet
  • You have a 230V power source available
  • You require high flow for irrigation or large homes
Skip if
  • You only have a 115V outlet
  • Your well casing is smaller than 4 inches
  • You need a lightweight pump for frequent moving

Verdict: VEVOR 2HP 230V Deep Well Pump delivers reliable deep-well performance for users with 230V power and 4-inch casings. It fits those prioritizing head height and flow over portability.

2
AQUASTRONG 1.6HP Shallow Well Jet Pump

AQUASTRONG 1.6HP Shallow Well Jet Pump

Best for: shallow well suction and garden irrigation

Voltage
115V
Horsepower
1.6 HP
Pump Type
Shallow well jet pump
Max Flow Rate
1340 GPH
Max Head
164 ft
Housing Material
Stainless steel

This is a 115V shallow well jet pump with a 1.6 HP motor. It delivers a max flow of 1340 GPH and a max head of 164 ft. The stainless steel housing resists corrosion. It includes a 5-gallon pressure tank and automatic pressure switch. It suits garden irrigation and home water supply needs.

Pros
  • 115V power for standard household outlets
  • Stainless steel housing for corrosion resistance
  • Automatic pressure switch for easy operation
  • NSF certified for drinking water safety
  • Thermal overload protection stops the motor
Cons
  • Lower max head of 164 ft compared to 230V models
  • Lower flow rate of 1340 GPH
  • Heavier and bulkier build at 22.8 inches tall
Good fit if
  • You need a 115V pump for shallow wells
  • You want NSF certified materials for drinking water
  • You require automatic pressure control for home use
Skip if
  • You need deeper well suction beyond 26 ft
  • You require higher flow rates for large farms
  • You need a 230V motor for heavy duty use

Verdict: AQUASTRONG 115V Shallow Well Pump fits homeowners needing reliable shallow well suction with standard voltage. It handles garden irrigation and domestic supply tasks well.

03 Specifications side by side

SpecVEVOR 2HP Deep Well Submersible PumpAQUASTRONG 1.6HP Shallow Well Jet Pump
Horsepower2 HP1.6 HP
Pump TypeDeep Well Submersible PumpShallow well jet pump
Max Flow Rate37 GPM1340 GPH
Max Head427 ft164 ft
Voltage230V115V
Housing MaterialStainless steelStainless steel
Outlet Port Size1-1/4" NPT1" NPT
ApplicationIrrigationIrrigation
Fuel TypeElectric–
MaterialStainless SteelStainless Steel
Intended UseHomeHome
Dimensions47.2 × 5.5 × 4.3 inches22.6 × 15.2 × 22.8 inches
Weight38 pounds–
Size4 x 42 in–
ColorSilver,blackNsf Black
ModelDeep Well Submersible PumpPGA150SAN

04 Frequently asked questions

Can I install a 230V pump if I only have 115V outlets?

No, you cannot directly install a 230V pump on a 115V circuit. The VEVOR 2HP model requires 230V power to operate its motor correctly. Using it on 115V would prevent it from starting or could damage the unit. You must have the appropriate voltage supply available at your well location.

Which pump is better for a deep well over 100 feet?

The VEVOR 2HP submersible pump is the better choice for deep wells. It is designed specifically for deep-well performance and fits 4-inch casings. The 230V motor provides the necessary power to lift water from significant depths, whereas the 115V jet pump is intended for shallow well suction applications.

Do both pumps use stainless steel construction?

Yes, both models feature stainless steel housings. This material choice helps resist corrosion and extends the lifespan of the equipment in wet environments. The VEVOR unit is a stainless steel submersible pump, while the AQUASTRONG jet pump also utilizes stainless steel components for durability in home irrigation systems.

What is the maximum depth each pump can handle?

The VEVOR 230V submersible pump is rated for depths up to 427 feet. It is built for deep water access with high head height capabilities. The 115V AQUASTRONG jet pump is designed for shallow wells. It relies on suction, so it works best for water sources located closer to the surface.

Is the 115V pump suitable for garden irrigation?

Yes, the 115V AQUASTRONG pump is well-suited for garden irrigation. It provides reliable suction for shallow wells and domestic supply tasks. Its 1.6 HP motor handles standard irrigation loads efficiently. If you need to water a garden from a shallow source, this voltage option meets those practical needs.

How much does each pump weigh?

The VEVOR 230V pump weighs 38 pounds. Its compact size measures 4 inches wide by 47.2 inches long. The AQUASTRONG 115V pump dimensions are larger, measuring 15.2 inches wide and 22.8 inches high. Weight and size affect installation, but specific weights for the jet pump are not listed in the data.

Can I use the 230V pump for home irrigation?

Yes, the VEVOR 230V pump is intended for home use and irrigation. It delivers reliable deep-well performance for users with 230V power. The stainless steel build ensures durability for long-term home irrigation needs. It prioritizes head height and flow, making it effective for supplying water to your property.

05 See also