As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

You are comparing a 115v230v vs 115V well pump setup. Both units deliver water for home or farm use. The Acquaer model is a convertible jet pump for shallow or deep wells. The VEVOR unit is a submersible pump for deep wells. The main difference is voltage flexibility. The Acquaer runs on 115V or 230V. The VEVOR runs only on 115V. Your choice depends on your well depth and electrical supply.

Voltage

115V/230V

115V

Pump Type

Convertible well jet pump

Deep well submersible pump

Housing Material

Cast iron

Stainless steel

Max Head

90 ft

276 ft

Max Flow Rate

not listed

37 GPM

Horsepower

1 HP

1.5 HP

Choose the first if

  • You need a pump for wells up to 90 feet deep.
  • Your electrical system supports 230V power.
  • You want a pump that works in shallow or deep wells.

Choose the second if

  • You have a deep well requiring high head pressure.
  • You need a high flow rate of 37 GPM.
  • You prefer stainless steel construction for corrosion resistance.

Verdict

Choose the Acquaer if you need voltage flexibility or have a shallower well. Pick the VEVOR if you require higher flow and deeper well performance. Both are built for reliable water delivery.

01 115V/230V vs 115V Pump Specs

Voltage flexibility

Edge: Acquaer 1 HP Convertible Well Jet Pump

The Acquaer pump supports dual voltage operation at 115V or 230V, though it ships factory-set for 230V. This allows you to choose the electrical supply that fits your existing wiring or local power standards. The VEVOR pump is rated strictly for 115V at 60Hz. If your well setup already has 230V lines, the Acquaer adapts without extra conversion hardware. The VEVOR unit requires a dedicated 115V circuit. For maximum electrical compatibility across different home setups, the dual-voltage option provides more installation flexibility.

Flow capacity

Edge: VEVOR 1.5HP 4" Submersible Well Pump

Water delivery speed differs significantly between these two models. The VEVOR submersible pump delivers a maximum flow rate of 37 gallons per minute. This high output is suitable for homes requiring substantial water volume for multiple fixtures simultaneously. The Acquaer convertible jet pump lists 1 HP power but does not specify a maximum GPM in its published data. Without a stated flow rate, you cannot compare direct volume output. If high volume is your priority, the VEVOR offers a clear, quantified advantage in gallons per minute.

Well depth capability

Edge: VEVOR 1.5HP 4" Submersible Well Pump

These pumps serve different well depths. The Acquaer is a convertible jet pump designed for shallow wells up to 25 feet or deep wells up to 90 feet using an ejector kit. It sits above ground or in a pit. The VEVOR is a deep well submersible pump with a maximum head of 276 feet. It is built to sit underwater in casing. If your well is deeper than 90 feet, the Acquaer cannot reach the water. The VEVOR handles much greater vertical lift distances for deeper installations.

Build material

Edge: VEVOR 1.5HP 4" Submersible Well Pump

Durability depends on construction materials. The Acquaer pump features a cast iron volute and housing. Cast iron is heavy and rugged, offering strong protection against physical damage and corrosion on the exterior. The VEVOR pump uses a stainless steel frame, including the outlet and connecting components. Stainless steel resists rust and corrosion, especially when submerged underwater for long periods. The VEVOR also holds an IP68 waterproof grade. For submerged longevity, stainless steel is generally more resistant to underwater corrosion than cast iron.

Protection features

Edge: Tie

Both units include motor protection but use different mechanisms. The Acquaer has built-in automatic thermal overload protection that shuts off the motor if it overheats or if water runs out. It also includes an automatic pressure switch that starts at 20 PSI and stops at 40 PSI. The VEVOR motor features built-in overload protection to stop operation if stuck or during abnormal situations. It includes a built-in check valve to prevent backflow and a stainless steel filtration mesh. The Acquaer integrates pressure control, while the VEVOR focuses on flow prevention and filtration.

02 Which pump fits your well depth

Users with shallow wells under 25 feet

Our pick: Acquaer 1 HP Convertible Well Jet Pump

The Acquaer unit is a convertible jet pump designed for single-pipe wells up to 25 feet deep. Its cast iron volute ensures durability for shallow applications. It includes an automatic pressure switch that activates below 20 PSI, providing consistent water pressure for home use without requiring submersion.

Owners of deep wells needing high flow

Our pick: VEVOR 1.5HP 4" Submersible Well Pump

This VEVOR submersible pump handles depths up to 276 feet with a max flow of 37 GPM. It features an 8-stage thermoplastic impeller system and stainless steel construction for corrosion resistance. The 1.5 HP motor delivers strong performance for deep well extraction, making it ideal for significant water demands.

Buyers needing dual voltage flexibility

Our pick: Acquaer 1 HP Convertible Well Jet Pump

Only the Acquaer pump offers dual voltage support at 115V or 230V. While it ships set for 230V, you can adjust it to match your existing electrical infrastructure. This flexibility simplifies installation if you have varying power sources available, whereas the VEVOR model is strictly limited to 115V operation.

#ProductBest forPrice
1Acquaer 1 HP Convertible Well Jet Pump115V/230V convertible well pumping
2VEVOR 1.5HP 4" Submersible Well Pump115V deep well water supply
1
Acquaer 1 HP Convertible Well Jet Pump

Acquaer 1 HP Convertible Well Jet Pump

Best for: 115V/230V convertible well pumping

Voltage
115V/230V
Horsepower
1 HP
Pump Type
Convertible well pump
Housing Material
Cast iron
Dimensions
14.6 × 10.4 × 8.1 inches
Weight
36.5 pounds

This Acquaer pump handles shallow and deep wells with a 1 HP motor. It runs on 115V or 230V, though the factory sets it to 230V. The cast iron housing supports wells up to 25 feet or 90 feet with an ejector kit. An automatic pressure switch activates at 20 PSI and stops at 40 PSI. You get overheat protection and a durable build for garden or farm use.

Pros
  • Dual voltage motor supports 115V and 230V operation
  • Cast iron volute ensures a durable housing
  • Automatic pressure switch starts at 20 PSI
  • Built-in thermal overload protection prevents overheating
Cons
  • Factory preset to 230V requires manual change for 115V use
  • 36.5-pound weight makes the unit heavier than lighter alternatives
  • 1 HP motor offers less power than the 1.5 HP competitor
Good fit if
  • You need a pump for wells up to 90 feet deep
  • You have a 230V electrical supply available
  • You want a cast iron pump for durability
Skip if
  • You strictly require a 115V factory setting
  • You need more than 1 HP of power
  • You prefer a lighter pump for easy installation

Verdict: Acquaer 1 HP Convertible Well Pump suits users with 230V power who need a durable cast iron pump for wells up to 90 feet deep.

2
VEVOR 1.5HP 4" Submersible Well Pump

VEVOR 1.5HP 4" Submersible Well Pump

Best for: 115V deep well water supply

Voltage
115V
Horsepower
1.5 HP
Pump Type
Deep Well Submersible Pump
Max Flow Rate
37 GPM
Max Head
276 ft
Housing Material
Stainless steel

This VEVOR deep well submersible pump runs on 115V power with a 1.5 HP motor. It delivers up to 37 GPM flow and 276 ft head. The 4-inch stainless steel housing resists corrosion. An external control box manages operation. It suits homes needing reliable water lift from deep wells. The 33 ft cord provides basic reach.

Pros
  • 1.5 HP motor for strong performance
  • 37 GPM max flow rate
  • 276 ft max head height
  • Stainless steel construction prevents rust
  • External control box included
Cons
  • Lower head capacity than 230V models
  • Heavier 29 lb build
  • Fixed 33 ft cord length
Good fit if
  • You need a 115V pump for deep wells
  • You want stainless steel durability
  • You prefer an external control box
Skip if
  • You require higher than 276 ft head
  • You need a longer than 33 ft cord
  • You prefer 230V power systems

Verdict: VEVOR 1.5HP 115V Deep Well Submersible Pump fits users needing solid 115V performance with durable stainless steel construction. It works well for deep wells where moderate head and flow meet your needs.

03 Specifications side by side

SpecAcquaer 1 HP Convertible Well Jet PumpVEVOR 1.5HP 4" Submersible Well Pump
Horsepower1 HP1.5 HP
Pump TypeConvertible well pumpDeep Well Submersible Pump
Max Flow Rate–37 GPM
Max Head–276 ft
Voltage115V/230V115V
Housing MaterialCast ironStainless steel
Outlet Port Size–1-1/4" NPT
Target ContaminantIron–
Application–Irrigation
MaterialCast IronStainless Steel
Intended Use–Home
Dimensions14.6 × 10.4 × 8.1 inches4 × 4 × 33.5 inches
Weight36.5 pounds29 pounds
Size1HP33.5 x 4 in
ColorBlackSilver,black
ModelCJE100-1Deep Well Submersible Pump

04 Frequently asked questions

Can I run a 230V pump on 115V power?

Yes, if the unit is convertible. The Acquaer pump supports both 115V and 230V operation. You can switch the wiring to match your available power source. This flexibility helps you use the same durable cast iron pump regardless of your electrical setup.

What is the difference between a jet pump and a submersible pump?

Jet pumps sit above ground and pull water up, while submersible pumps sit underwater and push water up. The Acquaer is a jet pump for wells up to 90 feet. The VEVOR is a submersible unit designed for deep well applications where it stays submerged.

Is 115V or 230V better for deep wells?

230V is often preferred for deeper wells because it draws less current, reducing voltage drop over long wire runs. The Acquaer unit ships factory-set for 230V, making it suitable for deeper applications. The VEVOR 115V pump is also built for deep wells but relies on its stainless steel construction.

How much does a 1HP convertible pump weigh?

The Acquaer 1HP convertible well jet pump weighs 36.5 pounds. It measures 14.6 inches in length, 10.4 inches in width, and 8.1 inches in height. This cast iron unit is designed for durability and handles wells up to 90 feet deep effectively.

What material is the VEVOR submersible pump made of?

The VEVOR 1.5HP submersible well pump is constructed from stainless steel. This material provides solid performance for deep well water supply. The unit is silver and black, measuring 4 inches in width and 33.5 inches in height, with a total weight of 29 pounds.

Can I use these pumps for irrigation?

Yes, the VEVOR submersible pump lists irrigation as a primary application. It is intended for home use and delivers moderate head and flow. The Acquaer jet pump is also suitable for general home water supply, which can include irrigation needs for shallow or deep wells.

Does the Acquaer pump handle iron contamination?

The Acquaer convertible well jet pump is targeted for iron removal. Its cast iron construction helps it withstand the demands of wells with iron content. This makes it a practical choice for users dealing with specific water quality issues alongside standard pressure pumping.

05 See also